AVAILABLE 7X SERIES PARTS--USA MARKET (2 Viewers)

[Owyhee Jackass]

Stabilizer Bar Cushion Bolt 90101-08055 (need two)

Metal Sleeve for above bolt and cushions 90387-09006

 

[Owyhee Jackass]

I mistakenly bought these initially, they list for a 7* series but were too small O.D. for my Troopy. Look to be similar to a 6* series bushing, maybe they're for a SWB?

Photo shows my old one compared to one of the new ones.

48815-30050 Bush, Stabilizer

 

[OGBeno]

I mistakenly bought these initially, they list for a 7* series but were too small O.D. for my Troopy. Look to be similar to a 6* series bushing, maybe they're for a SWB?

Photo shows my old one compared to one of the new ones.

48815-30050 Bush, StabilizerView attachment 1517355

FJ62 rear

FJ75/HJ75 front through 1986.

 

[coldtaco]

These bushes where a different size for the HJ and my old BJ

 

[OGBeno]

2H/12H-T oil pump gears:

Same engine pushrods and lifters:

Quite readily available in the US market. I was surprised.

 

[OGBeno]

3B/13B-T lower thermostat housing. The part number is actually from a Dyna. Why it is here in the US market, I have no idea.

You would also need the following gaskets:

16343-56023 (to the head)
16341-56021 (to the upper half)

Thermostat: 90916-03103

 

[OGBeno]

The issue with the above housing though is that there are too many threaded holes.

These are the two plugs you would need depending on what sensors you have installed in your lower thermostat housing (they are different between 3B/13B-T and between different market 3B's):

 

[OGBeno]

1HZ/1HD-T exhaust manifold (short side).

I was intrigued when I ordered this because the part number supersedes to a kit part number (the "H" in the suffix of the part number indicates a kit).

Low and behold, available in the US... and look what else you get? Way cool.

Of course, the long side still needs to come off line as the part is not available in the US market.

 

[FJ73Texas]

@beno

Are both 84460-20051 and 84460-12011 discontinued? I am guessing 8446012011 replaces 8446020051.

I guess what I should be asking is if they are available in the NA market.

 

[OGBeno]

17210-17021. Fan clutch usable on 1HZ and 1HD-T engines.

Available US market.

 

[OGBeno]

@beno

Are both 84460-20051 and 84460-12011 discontinued? I am guessing 8446012011 replaces 8446020051.

I guess what I should be asking is if they are available in the NA market.

The supersession is correct. -12011 shows available through normal Toyota US supply lines.

 

[FJ73Texas]

Thanks @beno

The supersession is correct. -12011 shows available through normal Toyota US supply lines.

Thanks @beno

 

[OGBeno]

2H/12H-T Intake and exhaust valves. Amazed these were still available.

1HZ/1HD-T etc. fan assy:

1HZ 12v glow plugs:

 

[OGBeno]

1PZ/1HZ power steering pump:

 

[Tapage]

I put a 1FZ-FE pump on my 1HD-T and it work flawless .. guess it will work on 1HZ too ..

 

[OGBeno]

I don't know. The mounting face of the 1FZ pump is different than this 1HZ pump above.

 

[Tapage]

Between 1HZ and 1HD-T are the same ..

 

[OGBeno]

Between 1HZ and 1HD-T are the same ..

Correct.

But I cannot see the 1FZ power steering pump working since the mating flange surface is much different. At least from my recollection. I don't have one in stock currently.

 

[Tapage]

Correct.

But I cannot see the 1FZ power steering pump working since the mating flange surface is much different. At least from my recollection. I don't have one in stock currently.

I have one in Marilu working for about 2 or 3 years now ..

 

[OGBeno]

I would love to see a picture of it on the 2 studs and attached. Very interesting. Thank you David.