Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
^ hella 4k's fit just fine on my 95+ bumper
Heres what I've done. Grille will be stainless weave, so it will cover them but won't obstruct the light output.
This is the light bar, mounts to top of frame rails into existing holes>
View attachment 424626
Mounted with lights. Hella 550's fit really well since they are a thin light.
View attachment 424627
Nice house, Jamie!I wanted to fit big Hella 4000 Luminators but they were too deep to just bolt straight onto the stock bumper.
Just went for the easy option of bolting a small strip of steel onto the bumper and bolting the lamps to that. Thought they would vibrate like crazy but 3 years on with no issues. Just use a decent thickness of steel strip.
Best picture I've got.
Jamie
It is definitely one of them, if not the best looking one!I think thats the nicest looking 80 I've ever seen!
Very nice step - what beam pattern are you using? I have Hella 500's but am thinking of going to the larger diameter light for more output.
I also have my Hella 4000 bolted to the bumper. I had to mod them to fit because the bumper is to close to the grill.
What I did was drilling two new mounting holes above the original holes in the light housing. Then the lights go a bit further from the grill and lower closer to the bumper.
Very nice step - what beam pattern are you using? I have Hella 500's but am thinking of going to the larger diameter light for more output.
Those certainly are bright and looks like good side dispersion too. Is it the 'euro beam' pattern?I'll chime in since I have the same setup.
Bright!
Although I have hid's in my 4ks.
Those certainly are bright and looks like good side dispersion too. Is it the 'euro beam' pattern?
Very nice step - what beam pattern are you using? I have Hella 500's but am thinking of going to the larger diameter light for more output.