SOLD Austin, TX: 1977 FJ40 Freeborn Red Patina (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Year
1977
Vehicle Model
  1. 40 Series
Location
United States
Color
Red
After much contemplation, I have decided to sell my 1977 Freeborn Red FJ40 Land Cruiser. I purchased this truck in June of 2019 in Longview, TX. I looked over a year for this particular truck as a clean starting point for my build. It was almost entirely in original condition, including the paint, when I purchased it. Since that time I have been building the truck and doing tasteful mods to keep the heritage of the vehicle true.

The previous owner rebuilt the motor, reupholstered the original seats, added new door seals, and coated the floor of the interior.

Since ownership I have done the following modifications:

  • Full OME 2.5" Light Duty Suspension Lift Including Shocks, Inversion Shackles, and Steering Stabilizer
  • Brand New Toyota H55F 5-Speed Conversion
  • 4:1 Toyota Split Transfer Case with Correct T-Case Emergency Brake
  • Tom Woods Driveshafts
  • 4.56:1 Diff Gears with ARB Air Lockers Front and Rear
  • New Toyota 15" Wheels Powdercoated White
  • BFGoodrich Mud Terrain Tires 33" x 10.5" x 15" (Including Spare)
  • Complete Japanese 555 Tie Rod End Kit
  • Full "Short" Birfield Conversion to Aisin Hubs
  • ARB Dual On-Board Air Compressor with Rear Bumper Tank
  • Holley Sniper EFI Conversion w/ Holley In-Tank Fuel Pump Bulkhead Kit
  • Dakota Digital RTX "Retro" digital gauge cluster
  • Ron Davis Racing Aluminum Radiator
  • DUI Performance GM "One Wire" Full Electronic Distributor
  • DUI Performance "Live Wires" Spark Plug Wires
  • Mean Green Performance GM-style Alternator
  • 4Plus Custom H55F Crossmember and Skid Plate
  • Custom 3" Stainless Steel Exhaust w/ Solo Performance "Stealth" Muffler and TPI Ceramic Coated Header
  • Stainless Trays SS Battery Tray
  • New Front and Rear Bumpers
  • Tons of Miscellaneous Wiring, Plumbing, Fuel, and Routing work to make the truck extra clean


262-C9-B52-E146-4-A99-B1-C8-739-D2-A00-D2-DA.jpg



C3-EE1-DEC-A1-F9-4-F91-993-D-7-D38931-DFB38.jpg


F9592-CCD-6-EE1-4-D1-C-980-D-540-B1-D9-FF779.jpg


The Good:
  • The truck is awesome and everything works. It will drive all day and crawl over anything in low range.
  • The Holley Sniper EFI setup is really slick. The truck starts right up and runs smooth with lots of power.
  • I have diagnosed all of the coolant and fuel leaks as well as the miscellaneous squeaking from the drivetrain.
  • The truck is in incredible original condition and the patina'd paint is aweseome.
The Bad:
  • No power steering
  • No A/C
  • The fancy powder coated valve cover seeps oil. I have repaired all other oil leaks and I have the original valve cover if you want to swap.
  • Some rust at the rear corners of the truck where the top meets the tub, and at the hardtop cowl
  • It needs a headliner

The weather in Central Texas is terrible right now, but I will get professional photos and video as soon as it clears up. For now, feel free to check out my build thread for more info and photos: Builds - 1977 Freeborn Red FJ40 Patina Build - https://forum.ih8mud.com/threads/1977-freeborn-red-fj40-patina-build.1146933/

I am asking $35,000 for the truck, but I am open to serious offers.

Thank you for your interest.
 
Last edited:

Users who are viewing this thread

Back
Top Bottom