Audio: Sound Meter and Custom Speaker Enclosure Threads? (1 Viewer)

[jaymar]

Saw these, can't find 'em now. One thread had a colorful photo of a sound meter in the front row, dialing things in. The other had custom made speaker mounts for tweeters; I think they were on the A pillars.

Anyone know where to find these?

 

[ERG80]

FJ80 Tweeter mount Landcruiser

Mirror plate to replace the interior cover plate and be able to install tweeters, these come in a set of both sides.Made for the 80 Series Landcruiser FZJ80 FJ80 Included are 6 stainless steel bolts for installation, there is a hole in the rear that routes down to a hole in the door for wiring...

solvefunction.com

Door mounted tweeter mounts right by the a-pillar. Is this what you were thinking of?

Added link to better pics of this mount.

awesome addition to your 80 for the audiophile

After exhausting search on the interweb....I found this 3d printed piece for your tweeters in the door sail. It was from solvefunction.com Ordered on a Monday, printed on a Tuesday, shipped on a Wednesday, arrived on Friday and installed on a Saturday. Pretty neat little addition for those...

forum.ih8mud.com

 

[jaymar]

FJ80 Tweeter mount Landcruiser

Mirror plate to replace the interior cover plate and be able to install tweeters, these come in a set of both sides.Made for the 80 Series Landcruiser FZJ80 FJ80 Included are 6 stainless steel bolts for installation, there is a hole in the rear that routes down to a hole in the door for wiring...

solvefunction.com

Door mounted tweeter mounts right by the a-pillar. Is this what you were thinking of?

Didn’t know about that one, thanks! One I’m thinking of, I think the guy made them out of Fiberglas. Might have been a double mount near center dash, too.

 

[ERG80]

Post 77

Builds - Airbagged 80 series on 42 inches. Low cost Russian build thread

Hi, thanks for sharing this build its awesome!Newbie here on air bags...What controls the rebound on your suspension?

forum.ih8mud.com

post 2 of this thread has some custom work:

“Sully” 1994 FZJ80 Light Build

Hello all, I'm a new member to MUD, but I’ve had a few Toyota’s in the last few years. My passion started when I test drove a base model 1986 Toyota pickup. Single cab, short bed, 5 speed. 4x4. 22r. I then moved on to a 3rd gen 4runner. I currently own a 1985 Toyota pickup Xtra cab 4x4 and a...

forum.ih8mud.com

Custom panels:

Custom Door Speaker Pods

NOTE: I made these about 1yr ago and thought I'd posted a buildup thread of them, as I'd done on another forum. Upon up dating the thread on the other forum, just recently, and attempting to do the same here, I realised I'd not done one here. And knowing how you guys love a decent speaker...

forum.ih8mud.com

I’ve been looking at components for my doors so have been looking around at mounting options too.

 

[jaymar]

Post 77

Builds - Airbagged 80 series on 42 inches. Low cost Russian build thread

Hi, thanks for sharing this build its awesome!Newbie here on air bags...What controls the rebound on your suspension?

forum.ih8mud.com

post 2 of this thread has some custom work:

“Sully” 1994 FZJ80 Light Build

Hello all, I'm a new member to MUD, but I’ve had a few Toyota’s in the last few years. My passion started when I test drove a base model 1986 Toyota pickup. Single cab, short bed, 5 speed. 4x4. 22r. I then moved on to a 3rd gen 4runner. I currently own a 1985 Toyota pickup Xtra cab 4x4 and a...

forum.ih8mud.com

Custom panels:

Custom Door Speaker Pods

NOTE: I made these about 1yr ago and thought I'd posted a buildup thread of them, as I'd done on another forum. Upon up dating the thread on the other forum, just recently, and attempting to do the same here, I realised I'd not done one here. And knowing how you guys love a decent speaker...

forum.ih8mud.com

I’ve been looking at components for my doors so have been looking around at mounting options too.

Good stuff, thanks! Those two I mentioned are still hiding somewhere, should be of interest to you too.

 

[jaymar]

Another interesting thread--also with sound level meter tests...

More evidence why the LX is quieter than the Land Cruiser

Having owned both a 2006 LX and Land Cruiser I always felt the LX provided a quieter ride than the Land Cruiser but never had any proof. Recently I installed a Attic Rack in both a 2006 LX and a 2006 Land Cruiser. The LX has more insulation in the ceiling also where the Land Cruiser uses raw...

forum.ih8mud.com

 

[jaymar]

Another custom tweeter mount thread:

Custom LX450 tweeter pods, speaker and stereo swap

I am in the middle of a stereo and speaker swap in my LX450 so I thought I would put some pick and start a thread on it for fun. Right Now I have a Pioneer Avic x930bt head unit with ipod adaptor and gps etc. Whole hog Sub adaptor and mounting plate for the rear. Infinity Kappa 5 Amplifier...

forum.ih8mud.com

 

[jaymar]

@ERG80 you know about this, right?

Quarter Panel Mount, 80 Series- right (batch 6 pre-order)

Quarter Panel Mount, 80 Series- right (batch 4 pre-order)(QPM-1)

absolute-wits-end.com

Wits' End Accessory Mounting Quarter Panel- need input

UPDATE: 6-22-2017 Okie dokie folks, I don't have 100% of the details worked out because I had a last minute idea I want to try and include. But I have enough info to set a price and start production within the next week or so. The new metal shop I've been working with has brought up a couple of...

forum.ih8mud.com

 

[ERG80]

@ERG80 you know about this, right?

Quarter Panel Mount, 80 Series- right (batch 6 pre-order)

Quarter Panel Mount, 80 Series- right (batch 4 pre-order)(QPM-1)

absolute-wits-end.com

Wits' End Accessory Mounting Quarter Panel- need input

UPDATE: 6-22-2017 Okie dokie folks, I don't have 100% of the details worked out because I had a last minute idea I want to try and include. But I have enough info to set a price and start production within the next week or so. The new metal shop I've been working with has brought up a couple of...

forum.ih8mud.com

I do know about these and will probably get one at some point.
Thanks!

 

[ERG80]

Didn’t know about that one, thanks! One I’m thinking of, I think the guy made them out of Fiberglas. Might have been a double mount near center dash, too.

Another good thread with pics. Post #19 has center dash double pod.

Tweeters, where??

I have two on the 'attic rack' but need two more up front. I'm robbing the signal from the dash speakers, and wanna put them on the Apillars, but where to sneak the wires up there cleanly? Also, were the factory speakers 8 ohm and paired(door/dash and door/rear headliner) to run 4 ohm? I'm...

forum.ih8mud.com

ETA: More info on that build:

Pioneer Head Unit and CDT Audio Speaker install

Even though there dozens of threads on speakers thought I would share my thoughts and install of CDT Audio Speakers in my 80... Many of you have seen the install pictures in my thread I thought it would be easier to find in this format. It really doesn't matter what I'm driving I have always...

forum.ih8mud.com