For Sale Asheville, NC - Lots of F60 parts from Engine Swap (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 2, 2014
Threads
7
Messages
24
Location
Asheville, NC
Location
United States
**Also posted this in "Parting Out" (not sure where it best belonged).

Long story short - my original FJ60 engine froze up many years ago. I struggled to find someone to work on it, and then decided to swap in a crate V8. But of course I hung onto all of the OEM parts that came off during the swap - and kept them in my basement. I drove (and loved) the V8 swap for a couple years until I sold the entire beautiful rig for a more ‘family friendly’ vehicle (ya ya ya - that’s whole other discussion). Anyway I’ve just been sitting on the parts, kinda forgetting about them in my basement until now! Figured I’d go ahead and sell these parts now to clear up some space.

I don’t really have the time (or admittedly even great knowledge of what is what) to itemize and photograph each piece on its own. So I hauled everything up to the sunshine, and took a bunch of pics of the collection as a whole. I’m sure there’s a mixture of hard-to-find and easy-to-find. Perfect condition and beat up. Working and broken. But it’s all here - around 40 various parts and pieces in total that came from a great condition FJ60 (pic attached of her as well - just so you can see she was a beauty). I’m hoping to find someone local to come grab the entire collection. Do with it whatever you want. Fix up an old rig, or clean up the parts and re-sell them for 3x more than you bought them from me for. I just need to space, and KNOW that there are people out there who can make good use of these (getting to be) rare parts.

I’m starting the price for the whole set at around $800 until I get feedback and learn a bit more. I’ll go high or lower depending on what happens.

IMG_3197.JPG


IMG_3199.JPG


IMG_3201.JPG


IMG_3205.JPG


IMG_3206.JPG


IMG_3207.JPG


IMG_3208.JPG


IMG_3210.JPG


IMG_3214.JPG


exterior_opened_06.jpeg
 
@Eric P PM price on the distributor w/coil & ignitor, alternator, & gear reduction starter if you're wiling to sell separate and ship to 92590.
 
Last edited:
If you are willing in selling separately, interested in clutch fork and throw out bearing housing.
 
Interested in the carb, intake, starter and thermostat housing to 91502.
 
Hello, if you do split up I'm interested in the power steering pump, air pump and oil cooler shipped to 91040.
 
Hey thanks everyone - looks like splitting up the collection might be the way to go. I'll send you all PM's tomorrow and get things moving along.
 
My PM box is locked for my sanity. Please reach out to me via telephone.
 
**udpate - sorry for the delay! Had some family stuff come up. I will be reaching out to ALL of you who contacted my (either in this thread or PM box). I will indeed be parting this out - and I'll just go in order of who reached out first for what...although it seems like everyone is interested in different things - which is great! Give me into this next week to make contact with everyone - and I'll get these parts moving out asap. Appreciate the patience
 
**Also posted this in "Parting Out" (not sure where it best belonged).

Long story short - my original FJ60 engine froze up many years ago. I struggled to find someone to work on it, and then decided to swap in a crate V8. But of course I hung onto all of the OEM parts that came off during the swap - and kept them in my basement. I drove (and loved) the V8 swap for a couple years until I sold the entire beautiful rig for a more ‘family friendly’ vehicle (ya ya ya - that’s whole other discussion). Anyway I’ve just been sitting on the parts, kinda forgetting about them in my basement until now! Figured I’d go ahead and sell these parts now to clear up some space.

I don’t really have the time (or admittedly even great knowledge of what is what) to itemize and photograph each piece on its own. So I hauled everything up to the sunshine, and took a bunch of pics of the collection as a whole. I’m sure there’s a mixture of hard-to-find and easy-to-find. Perfect condition and beat up. Working and broken. But it’s all here - around 40 various parts and pieces in total that came from a great condition FJ60 (pic attached of her as well - just so you can see she was a beauty). I’m hoping to find someone local to come grab the entire collection. Do with it whatever you want. Fix up an old rig, or clean up the parts and re-sell them for 3x more than you bought them from me for. I just need to space, and KNOW that there are people out there who can make good use of these (getting to be) rare parts.

I’m starting the price for the whole set at around $800 until I get feedback and learn a bit more. I’ll go high or lower depending on what happens.

View attachment 2911063

View attachment 2911064

View attachment 2911066

View attachment 2911067

View attachment 2911068

View attachment 2911069

View attachment 2911070

View attachment 2911071

View attachment 2911073

View attachment 2911074
No chance you have a fuel tank?
 
** UPDATE: EVERYTHING IS STILL FOR SALE!

Sorry for going silent for a while there (and for leaving some inquiries without a response). Had some big family stuff come up - then some big work stuff - that forced me to focus my efforts elsewhere for a while. But I've still got all of these parts for sale - and I'm ready to get them into the hands that want the. Again, in an ideal world, I'd find someone who wants to come grab the whole lot. I'll keep my eyes posted on my messages and/or responses within this thread. Thanks!
 
Also - if you PM'd me previously - and are still interested - I'll make sure you stay at the top of the list if I start to part things out!!
 
Interested in the carb, intake, starter and thermostat housing to 91502.
Still interested. No PM tho; I don’t do the PM thing. Something about transparency.

Not implying anything about you; I’ve just been bumped out a lot of times by people who don’t bother publicly posting interest in something, so you THINK you’re first in line when you’re not.
 
Last edited:
Still interested. No PM tho; I don’t do the PM thing. Something about transparency.
Yeah no worries about PMs - I'm good with either way. I'm not a prolific 'shipper' - so let me grab these pieces, measure them out, and figure out how to put together a realistic price for ya!
 
I will buy the clutch/bellhousing lower cover, the transmission front bearing retainer and the distributor (if @EWheeler passes on the distributor). Thank you
 

Users who are viewing this thread

Back
Top Bottom