ARB Front Bumper Owners... (1 Viewer)

[SupraTuRD]

Does anyone have the 6” bolts for the roller fairlead that they do not need? The bumper should have come with the long bolts to use with the roller fairlead but I know many of you have gone directly to the synthetic line/hawse fairlead route. My 80 was purchased with the bumper already installed and I did not get the hardware from the previous owner. Thanks in advance!

 

[Cruzerman]

I just went to the hardware store. The long ones I did have to cut to length but no big deal since the ones the store carried were either too long or too short. I also had to drill a hole in the roller fairlead for the other bolt since my fairlead's holes didn't line up when I used the "long" bolts. Again, no big deal.

 

[bigredmachine]

you could get threaded rod, cut to length and just use a nut on both ends

 

[SupraTuRD]

Bolts/nuts/washers inbound. Thanks all!