Anyone with 95-97 WKOR sliders? (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 15, 2021
Threads
19
Messages
123
Location
Richmond, VA
Hey y’all,

After an abortive foray into Rocky Road Outfitters sliders, I’m looking to order some WKOR sliders, but I have a question-
How many inches from the front of the PS rocker panel is the center mounting bracket on the inline catalytic converter skid plate for the 95-97 sliders?

It looks as though this bracket fits snugly between the front and rear cat, and my concern is that I have a 94 and am running a Magnaflow y-pipe with a single cat that may interfere with fitment. Alternately, anyone have any success finding sliders that fit this set up? Thanks!
 
D971CF89-ED24-48C8-AECA-253D41648015.jpeg

You can see that my cat occupies the space from about 8 inches to 19 inches back from the front of the rocker.
 
The bracket falls between the cats, directly under the flanges.
I had to take an angle grinder and hog off exes material on the flanges and run the rock sliders at a lower position to keep the exhaust from hitting on the rock sliders.
Its working. And my :princess: appreciates the .5" lower step.
 
View attachment 2979206
You can see that my cat occupies the space from about 8 inches to 19 inches back from the front of the rocker.
See the attached pics from my 96 with WKOR and Magnaflow downpipes and dual cats.

Lots of clearance. I installed the Magnaflow without removing the WKOR. I have the 10° angle WKOR so they act as more of a step.

Don't have a dimension on them for you.
IMG_20191027_180646074 (Medium).jpg
IMG_20191027_180652878 (Medium).jpg
IMG_20191027_180659921 (Medium).jpg
IMG_20191027_180713064 (Medium).jpg
IMG_20191027_180725230 (Medium).jpg
 
IMG_20191027_180732924 (Medium).jpg
 

Users who are viewing this thread

Back
Top Bottom