- Thread starter
- #61
I will measure tomorrow night. Just so I know, are you trying to measure to drill new holes through an undrilled windshield frame?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Yes so I can use the 70’s wiper set up from the original wind shield. I sure appreciate you doing that for me.I will measure tomorrow night. Just so I know, are you trying to measure to drill new holes through an undrilled windshield frame?
Many TNX for your help, I will lay it out and see where it takes me. I started this process with doing it with thinking I would use the original set up motors . It came with the old style two motor set up. To much work forming the cage around the two. With the stock 70 unite it was a bunch cleaner install, some work but with your input I think I will be able to pull this off, TNX againHere are the measurements the best way I could figure to get them to you. The main hole for the shaft is a touch over 1/2 inch. I was reminded tonight that the wiper setup mounts into threaded inserts so you will have to add those. Hope this helps.
View attachment 2327184
View attachment 2327186
View attachment 2327188