Alternative Oil Filter for 2F (1 Viewer)

[petrolhead]

I bought my truck from a dude that is a Toyota/Audi technician. He did the research and put this Bosch oil filter on. It’s 6.5” tall and 3.5” in diameter. Pretty good size. Part #074 115 561. ECS tuning has them for under $15. I notice my oil on the dipstick stays clean for a long time and has no effects on my pressure reading.

I also use the 15600-41010 Toyota filters for you purists.

 

[brian]

so every time you change the filter you need to pull the the coil lead....no way i would run the engine with no oil pressure for as long as it would take to fill that.

 

[Michael Hanson]

Hi, Just replace with Fram ph8. They are cheap ,esp. if you replace them every 3000 miles like I do. Mike

 

[waexplorer]

Motorcraft FL1A, I work @ a Ford dealer

 

[Seth S]

The Toyota oil filter at the dealer works great and it’s not expensive. The original Toyota filters were large cans and there doesn’t seem to have been a wave of engine failures due to filling the filter after oil change. There are a lot of oil filter threads on the forum and some of the more recent ones have been pointing to some wix filter failures that scrapped engines.

 

[Jaric00n]

I just use the large ones and call it a day

=3

 

[DougRFJ62]

Wix 51773

Photo credit: The Wagon Way

 

[srogers]

Napa 1773 - probably identical in spec to the WIX 51773 posted above...

 

[ToyotaMatt]

VintageTEqParts.com

vintageteqparts.com

this is a clone of a 15600-41010

i cut one apart and have Video of the Anatomy of a Union Sangyo C-110

this sold me its the real deal !