I have a 2007 with AHC. About 2-3 years ago I blindly cranked the torsion bar 5 cranks.
I bought the techstream tool recently and my AHC pressures were reading fairly high in the back. So i replaced the rear springs with King Springs.
Now my AHC is reading 4.8 in the rear, 6.9 in the front.
Rear -Is that too low in the back? If so, is there anything to do to increase the pressure? Should i just wait for the springs to age some and raise the pressure naturally?
Front - Should I crank the TB's more to get that front pressure down? Or just leave alone?
Thanks in advance on the thoughts.
I bought the techstream tool recently and my AHC pressures were reading fairly high in the back. So i replaced the rear springs with King Springs.
Now my AHC is reading 4.8 in the rear, 6.9 in the front.
Rear -Is that too low in the back? If so, is there anything to do to increase the pressure? Should i just wait for the springs to age some and raise the pressure naturally?
Front - Should I crank the TB's more to get that front pressure down? Or just leave alone?
Thanks in advance on the thoughts.