Aftermarket alarm LED placement

alia176

SILVER Star
Joined
Aug 21, 2003
Messages
14,311
Location
Tijeras, NM
This is probably about the lowest tech content posting there is :D Just curious as to where some of you are placing the alarm LED (arm/disarm indication) in your vehicles with wood trim? I'm just having way too much fun with my new (to me) FZJ!

Happy Triptophane loading :cheers:

Ali
'96
 
Joined
Mar 27, 2003
Messages
2,610
My 80's PO placed the LED in one of the plastic inserts closest to the driver door . By insert I am referring to the ones you pop out when you want to replace it with a fog light switch etc ... :cheers:
 
Joined
Aug 26, 2002
Messages
425
Joined
Oct 13, 2003
Messages
534
Location
Pattaya, Thailand
Here:

retract.jpg


Mike
 

alia176

SILVER Star
Joined
Aug 21, 2003
Messages
14,311
Location
Tijeras, NM
Mike,

Couldn't quite tell where your LED is but assuming it's OME, then it's prolly located on one of the switch holes (like they have in the U.S).

Joe,
I'm after an alarm LED (blinky, blinky), not George's dome light LED replacements! BTW, I have them too and they're fantastic.

Anyone else?

Bling, bling...!
 
Joined
Oct 13, 2003
Messages
534
Location
Pattaya, Thailand
Mike,

Couldn't quite tell where your LED is but assuming it's OME, then it's prolly located on one of the switch holes (like they have in the U.S).

I have aftermarket alarm and you see three buttons in one place second next to the mirror controls or in other words outside right. This three buttons are the blinky, blinky, the panic button and my restore button. On top you see something like a remote control. That is my pager for the alarm. Furthermore I have a remote display for my alarm that shows me in case where the burglar is entering the car.

Mike
 

alia176

SILVER Star
Joined
Aug 21, 2003
Messages
14,311
Location
Tijeras, NM
I ended up sticking the blinky blinky LED in front of the clock. There's a flat surface that seems appropriate for this project.

Thanks.
 

Users who are viewing this thread

Top Bottom