After reading a ton of threads on rewiring a 40, I have decided to rebuild my original. I am the second owner and it is largely intact and original compared to most. Also, I am going to keep the 2F in there until it dies... right after all the cockroaches and Glocks are gone.
It seems pretty straight forward as I have a few shorts, and I melted my main wire from the battery to the amp meter... likely taking out several other wires along the way. (didn't replace that fusible link in time).
I am basically looking for pointers, tips that would help, resources for proper colored wires and connectors. I am considering going to convert over to Duetsch connectors for the exposed connections outside of the dash.
For those of you that have been down this road, what are the tips that helped, tools that helped and products that worked?
It seems pretty straight forward as I have a few shorts, and I melted my main wire from the battery to the amp meter... likely taking out several other wires along the way. (didn't replace that fusible link in time).
I am basically looking for pointers, tips that would help, resources for proper colored wires and connectors. I am considering going to convert over to Duetsch connectors for the exposed connections outside of the dash.
For those of you that have been down this road, what are the tips that helped, tools that helped and products that worked?