- Joined
- Apr 14, 2004
- Threads
- 1,353
- Messages
- 34,471
- Location
- 818-953-9230
- Website
- www.marksoffroad.net
- Location
- United States
One pair of front plates made by Ross Stewart at Advanced Handling for me years ago. I installed the driver's side one, but never got around to the passenger side. As you can see from the photo, it's got the notch to fit around the carrier-axle housing. By moving the U-bolts up alongside the springs, you end up with the maximum possible ground clearance with an SUA rig.
After many years on the trail, the ds plate is still in very good condition.
$60 plus the ride.
After many years on the trail, the ds plate is still in very good condition.
$60 plus the ride.
Last edited:
