Adjusting valves HJ61

[BURGER]

I was trying to download off of the birfield site on how to do this but the links do not work anymore. Where can I get that info from, like adjustring specs and such? What is all involved with it and what gaskets/seals will be needed?

 

[Greg_B]

I was trying to download off of the birfield site on how to do this but the links do not work anymore. Where can I get that info from, like adjustring specs and such? What is all involved with it and what gaskets/seals will be needed?

I've e-mailed to ask and see. You could put a new valve cover gasket on...or not.

Have fun getting the valve cover off. Can be a rpita...

You could lower the tranny a bit, or move the vacum line out of the way, or work the cover for a while till it is just at the right angle to clear the rear area.

Mark the V in the front pulley so it is easier to set it spot on. Helps to have two people to set the V, unless you have a hand held button that hooks up to the starter so you can set it while looking at the pulley.

hth's

gb

 

[Greg_B]

I was trying to download off of the birfield site on how to do this but the links do not work anymore.

Links fixed.

gb

 

[BURGER]

You da man greg!!

Thanks fro the help