- Location
- United States
Mounted for a few thousand miles. Replaced with ARB Summit Bar. Good condition, but it is used. All hardware accounted for, and placed in labeled Ziploc bags.
Upper bash plate was powder-coated black. Lower plate is still in raw finish. Upper bash plate has two holes drilled to mate with BudBuilt skids.
Upper fascia plate has a Wit’s End bulkhead fitting for compressed air and ARB coupler.
Wings were and are still wrapped to protect powder-coat. Driver side wing has a blemish in the metal.
Fender plates were damaged in shipping, and appeared to interfere with KDSS arm. I didn’t do any chopping to fit. It wouldn’t take much to make it work.
$400. Local pickup or Mudship only.
Upper bash plate was powder-coated black. Lower plate is still in raw finish. Upper bash plate has two holes drilled to mate with BudBuilt skids.
Upper fascia plate has a Wit’s End bulkhead fitting for compressed air and ARB coupler.
Wings were and are still wrapped to protect powder-coat. Driver side wing has a blemish in the metal.
Fender plates were damaged in shipping, and appeared to interfere with KDSS arm. I didn’t do any chopping to fit. It wouldn’t take much to make it work.
$400. Local pickup or Mudship only.
Last edited:
