A newbie build 94 Crap box (1 Viewer)

Joined
Oct 30, 2014
Messages
6
Hello,

Since I'm new and I scavenge off the great ideas off this thread, I decided to share mine.

Bought this crap pile for $2200. It's ugly, but runs. I'm not a hardcore guy, but since I own a recycling company I get access to chromo, titanium, and ridiculous amounts of aluminum plate/ angle.

Plans are to make a front and rear custom bumper, Rear UCA and LCA, Track bars and skid plate.

Any suggestions on good coils would be great because my Bilsteins + stock coils + Load Range E tires are brutal!

Here the motor that blew a head gasket due to PHH (GRRRR). Changed all the hoses, fully inspected the tranny and transfer case and changes seals etc.
DAN-PERSONAL 219.jpg
DAN-PERSONAL 212.jpg
DAN-PERSONAL 207.jpg
DAN-PERSONAL 246.jpg
DAN-PERSONAL 219.jpg
DAN-PERSONAL 212.jpg
DAN-PERSONAL 207.jpg
DAN-PERSONAL 246.jpg
DAN-PERSONAL 252.jpg


DAN-PERSONAL 219.jpg
 
Joined
Oct 30, 2014
Messages
6
And the tranny, which as I posted on another thread was in decent shape?
DAN-PERSONAL 188.jpg
DAN-PERSONAL 201.jpg
DAN-PERSONAL 188.jpg
DAN-PERSONAL 201.jpg
DAN-PERSONAL 216.jpg
DAN-PERSONAL 215.jpg
DAN-PERSONAL 254.jpg
 
Joined
Oct 30, 2014
Messages
6
And my control arms. Since no manufacture that I've seen makes the bushings I wanted, particularly a 2.37" width with 18 MM bolt
20141024_162602.jpg
20141029_124815.jpg
20141024_162602.jpg
20141029_124815.jpg
20141030_102919.jpg
I ended up calling EMF and they made me some 4140 female bushings to fit the rods I had.
 

Users who are viewing this thread

Top Bottom