Builds A little "Sugar" (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Sugar's bumper arrived, great packaging. Thanks to Trail Tailor for a great bumper. Beautiful work Jason.
Thought I was getting a free hand truck in the deal :)
95714107_3250236895007179_6808345671872020480_n.jpg
 
Bumper swing out parts are primed and painted. Waiting on the drive line parts to arrive. Covid-19 has really slowed down supply lines on a lot of items I use in the shop.

98022150_3315747511789450_1841004295110000640_n.jpg
 
Sugar got some stopping power today

 
No and no. Sugar is a 60 on 80 roller with 80 axles and components. Standard 80 series 4 piston calipers.
 
Sugar will go a long way between fill ups with this 42 gallon tank from Cruiser Brothers. Fuel pump module and float less fuel level sender from Tanks Inc. Primed, Lizard Skin and final paint.

99426516_3342227649141436_1626887453711269888_o.jpg

100679412_3342228679141333_8781335643427962880_o.jpg

98610782_3342229412474593_2766626836103299072_o.jpg

100087357_3342230312474503_665789573774704640_o.jpg
100515710_3342230712474463_9140468696911708160_o.jpg
 
Sugar's bumper is fit, ready to be pulled for paint. 60 bumper mounted in an 80 frame, like it grew there. Trail Tailor makes a great product!

101428762_3357042500993284_3347274219447648256_o.jpg
 
This huge monstrosity is a take out pedal that comes with a 5.3L take out motor.

100939155_3357044684326399_2650015128237375488_o.jpg


This is how it looks ready to install. well, after it gets painted.

101174586_3357045120993022_4694966782916558848_o.jpg
 
This NV4500 is going into Sugar. Makes the Toyota trans look like a toy. I have one of these in my pick up, it's been towing hard since 2002, no issues.

102362842_3372936629403871_7495917326907211776_o.jpg
 
Will you run the stock toyota transfer case and if so is there an adapter readily available...or do you run something like a NP202? I don't know much about these cases other than seeing them listed in various classifieds where people did V8 conversions
 
Stock 60 series split case. That is the adapter on the back of the trans.
 
The stock 60 series dash is being replaced with a 62 series dash

103565284_3387058231325044_2234286981606280120_o.jpg
 
Yes, the lower dash has been painted Satin Black
 
This bus plate mounts in the driver's foot well. Relays transform BATT power to IGN and Dash light power using just mili amps from the OEM wiring rather than wiring electrical additions directly to the OEM harness. The dash light bus bar is mounted on the fire wall.

103883556_3398067583557442_6599874799109133288_o.jpg
 
Sugar's finally got the correct adapter! Somebody thought a quart of silicone was a good idea for putting a T case together.

105988269_3434525986578268_8544376812779764065_n.jpg

106578197_3434526036578263_1811393553242698342_n.jpg
 
Beautiful build!

@NCFJ


Would you mind taking a few pics of how you mount the "new " seatbelts in the back when you get to that point?

Waiting for a few overseas parts before I start mine & I would love to see how you mount the retractor.
 

Users who are viewing this thread

Back
Top Bottom