Couple simple questions about the TRD Rock Warrior wheels
- Are there knockoff or aftermarket copies of these wheels? Looking around you can get them "reconditioned" from Keystone and a few other vendors for as low as $130 per wheel. Not sure if these are OEM wheels refinished or knockoffs.
- Are there any identifying marks cast or machined into the OEM wheels that would confirm if a wheel is genuine? Something like "TRD Forged" or a part number or similar. If there is a photo of that available I would be greatly appreciative
- Is there any geometry to the trim ring other than the counterbores for the button head screws and the cutout for the valve stem? Are the back surfaces flat? I have access to an industrial laser and a waterjet and could draw up some replacement trim rings and get them made easy if they are 2D parts. If they are 3D parts its a bit more of a challenge. The wheels you can get from Keystone do not have trim rings or center caps. Center caps are cheap enough, bolts can be ordered from any fastener house, but the trim rings would have to be fabricated. I could make some sweet custom rings, but if they are not flat it would be a challenge.