- Location
- United States
Vehicle located in Panama City, Panama. Buyer is responsible for shipping and import duties.
$26,000 OBO
Base model: HZJ-105
Engine: 1HD-T
Transmision: R151F
Transfer: Full-time
Axle: K295 (80 series lug with 105 series calipers)
Suspension
6" Slee Offroad Lift Kit $2,295.00
2 degree OME Caster Bushings $89.00
Front 2x Cardan Drive Shaft $379.00
Rear 2x Cardan Drive Shaft $379.00
DriveTrain
1HD-T engine swap $1,000.00
JOE MBC boost Controller $44.50
3" custom exhaust $300.00
Powershot 2000 Propane Injection system w/ custom mounted switches $900.00
4.88 PG gearset $450.00
ARB Locker rear $800.00
ARB mini compressor $161.59
Bobby Long Birfields/Longfields $600
5 to 6 lug axle conversion $200.00
ProComp 17" x 9" wheels 4.5" BS $740.00
Toyo Open Country M/T 37" x 13.5" R17 $1,935.00
Body/Exterior
Custom Front Bumper $500.00
Safari Snorkel $395.00
Toyota/AISIN OEM winch $800.00
Hybrid Thule surf racks $250.00
Lighting/Electrical/Interior
Optima redtop battery $244.00
Toshiba HIR bulbs $100.00
Lightforce 240 Blitz lights $360.00
400 watt power inverter center console outlet $60.00
Autometer Sport Comp II Boost gauge $60.00
Autometer Sport Comp II EGT gauge $170.00
Custom Roof Mounted Switchboard $27.00
JVC 2x DIN DVD Player customdash mounted A/V input $300.00
VIBE 6.5" front speakers $210.00
Cadence 6" coaxial rear speakers $119.95
Kicker KX Amp $250.00
Kicker Mono Class D Amp $300.00
JL Audio 13" W5 Sub / Enclousure $420.00
Total Extras $14,456.04
I also have brand new and in box a 1000 watt marine power inverter and PSC hydro assist with weld-on tabs, couplings, and hoses. Also there is the 37" spare tire that has never seen the floor with matching wheels. There is a Destaco latch and a Big Balls Offroad spindle to fabricate the spare tire carrier. Buyer takes all.
Punchlist:
1- install bumbstops or cut fenders.
2- make a plastic/fiberglass cover for winch controler box (the existing one is sheet metal)
3- valvecover breather is venting to atmosphere. Propane injection system plumbs in through existing hole in filter box. Oil catch can needed.
4- keyless entry not working. I have a new key but it has not been re-porgramed at the dealer.
5- Propane injection system charge port is located under vehicle.
Besides the punchlist items, the only thing this vehicle is missing is a front air/e locker. This vehicle is full-time 4WD. Needs a locker that is selectable and normally open.
Make me an offer ... you might be surprised!
$26,000 OBO
Base model: HZJ-105
Engine: 1HD-T
Transmision: R151F
Transfer: Full-time
Axle: K295 (80 series lug with 105 series calipers)
Suspension
6" Slee Offroad Lift Kit $2,295.00
2 degree OME Caster Bushings $89.00
Front 2x Cardan Drive Shaft $379.00
Rear 2x Cardan Drive Shaft $379.00
DriveTrain
1HD-T engine swap $1,000.00
JOE MBC boost Controller $44.50
3" custom exhaust $300.00
Powershot 2000 Propane Injection system w/ custom mounted switches $900.00
4.88 PG gearset $450.00
ARB Locker rear $800.00
ARB mini compressor $161.59
Bobby Long Birfields/Longfields $600
5 to 6 lug axle conversion $200.00
ProComp 17" x 9" wheels 4.5" BS $740.00
Toyo Open Country M/T 37" x 13.5" R17 $1,935.00
Body/Exterior
Custom Front Bumper $500.00
Safari Snorkel $395.00
Toyota/AISIN OEM winch $800.00
Hybrid Thule surf racks $250.00
Lighting/Electrical/Interior
Optima redtop battery $244.00
Toshiba HIR bulbs $100.00
Lightforce 240 Blitz lights $360.00
400 watt power inverter center console outlet $60.00
Autometer Sport Comp II Boost gauge $60.00
Autometer Sport Comp II EGT gauge $170.00
Custom Roof Mounted Switchboard $27.00
JVC 2x DIN DVD Player customdash mounted A/V input $300.00
VIBE 6.5" front speakers $210.00
Cadence 6" coaxial rear speakers $119.95
Kicker KX Amp $250.00
Kicker Mono Class D Amp $300.00
JL Audio 13" W5 Sub / Enclousure $420.00
Total Extras $14,456.04
I also have brand new and in box a 1000 watt marine power inverter and PSC hydro assist with weld-on tabs, couplings, and hoses. Also there is the 37" spare tire that has never seen the floor with matching wheels. There is a Destaco latch and a Big Balls Offroad spindle to fabricate the spare tire carrier. Buyer takes all.
Punchlist:
1- install bumbstops or cut fenders.
2- make a plastic/fiberglass cover for winch controler box (the existing one is sheet metal)
3- valvecover breather is venting to atmosphere. Propane injection system plumbs in through existing hole in filter box. Oil catch can needed.
4- keyless entry not working. I have a new key but it has not been re-porgramed at the dealer.
5- Propane injection system charge port is located under vehicle.
Besides the punchlist items, the only thing this vehicle is missing is a front air/e locker. This vehicle is full-time 4WD. Needs a locker that is selectable and normally open.
Make me an offer ... you might be surprised!