'99 LandCruiser Diesel 1HD-T (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Location
United States
Vehicle located in Panama City, Panama. Buyer is responsible for shipping and import duties.

$26,000 OBO

Base model: HZJ-105
Engine: 1HD-T
Transmision: R151F
Transfer: Full-time
Axle: K295 (80 series lug with 105 series calipers)

Suspension

6" Slee Offroad Lift Kit $2,295.00
2 degree OME Caster Bushings $89.00
Front 2x Cardan Drive Shaft $379.00
Rear 2x Cardan Drive Shaft $379.00

DriveTrain

1HD-T engine swap $1,000.00
JOE MBC boost Controller $44.50
3" custom exhaust $300.00
Powershot 2000 Propane Injection system w/ custom mounted switches $900.00
4.88 PG gearset $450.00
ARB Locker rear $800.00
ARB mini compressor $161.59
Bobby Long Birfields/Longfields $600
5 to 6 lug axle conversion $200.00
ProComp 17" x 9" wheels 4.5" BS $740.00
Toyo Open Country M/T 37" x 13.5" R17 $1,935.00

Body/Exterior

Custom Front Bumper $500.00
Safari Snorkel $395.00
Toyota/AISIN OEM winch $800.00
Hybrid Thule surf racks $250.00

Lighting/Electrical/Interior

Optima redtop battery $244.00
Toshiba HIR bulbs $100.00
Lightforce 240 Blitz lights $360.00
400 watt power inverter center console outlet $60.00
Autometer Sport Comp II Boost gauge $60.00
Autometer Sport Comp II EGT gauge $170.00
Custom Roof Mounted Switchboard $27.00
JVC 2x DIN DVD Player customdash mounted A/V input $300.00
VIBE 6.5" front speakers $210.00
Cadence 6" coaxial rear speakers $119.95
Kicker KX Amp $250.00
Kicker Mono Class D Amp $300.00
JL Audio 13" W5 Sub / Enclousure $420.00

Total Extras $14,456.04

I also have brand new and in box a 1000 watt marine power inverter and PSC hydro assist with weld-on tabs, couplings, and hoses. Also there is the 37" spare tire that has never seen the floor with matching wheels. There is a Destaco latch and a Big Balls Offroad spindle to fabricate the spare tire carrier. Buyer takes all.

Punchlist:

1- install bumbstops or cut fenders.
2- make a plastic/fiberglass cover for winch controler box (the existing one is sheet metal)
3- valvecover breather is venting to atmosphere. Propane injection system plumbs in through existing hole in filter box. Oil catch can needed.
4- keyless entry not working. I have a new key but it has not been re-porgramed at the dealer.
5- Propane injection system charge port is located under vehicle.


Besides the punchlist items, the only thing this vehicle is missing is a front air/e locker. This vehicle is full-time 4WD. Needs a locker that is selectable and normally open.

Make me an offer ... you might be surprised!
 
P1010502.jpg

P1010500.jpg


P1010506.jpg


P1010510.jpg

P1010508.jpg
 
Switch Panel

P1010514.jpg


P1010523.jpg


P1010515.jpg


P1010516.jpg


P1010517.jpg


P1010519.jpg


Inversor DC-AC de 400W

P1010518.jpg
 
P1010520.jpg


oil pressure at idle

P1010511.jpg


oil pressure at WOT

P1010512.jpg
 
It seems like it would be impossible to import to the US, otherwise i'd be all over it. I've done the drive back and forth from Panama- what a fun road trip that is!
 
damn

Damn. Ok, so I'll trade you rigs and locations in about 10 years!




Vehicle located in Panama City, Panama. Buyer is responsible for shipping and import duties.

$26,000 OBO

Base model: HZJ-105
Engine: 1HD-T
Transmision: R151F
Transfer: Full-time
Axle: K295 (80 series lug with 105 series calipers)

Suspension

6" Slee Offroad Lift Kit $2,295.00
2 degree OME Caster Bushings $89.00
Front 2x Cardan Drive Shaft $379.00
Rear 2x Cardan Drive Shaft $379.00

DriveTrain

1HD-T engine swap $1,000.00
JOE MBC boost Controller $44.50
3" custom exhaust $300.00
Powershot 2000 Propane Injection system w/ custom mounted switches $900.00
4.88 PG gearset $450.00
ARB Locker rear $800.00
ARB mini compressor $161.59
Bobby Long Birfields/Longfields $600
5 to 6 lug axle conversion $200.00
ProComp 17" x 9" wheels 4.5" BS $740.00
Toyo Open Country M/T 37" x 13.5" R17 $1,935.00

Body/Exterior

Custom Front Bumper $500.00
Safari Snorkel $395.00
Toyota/AISIN OEM winch $800.00
Hybrid Thule surf racks $250.00

Lighting/Electrical/Interior

Optima redtop battery $244.00
Toshiba HIR bulbs $100.00
Lightforce 240 Blitz lights $360.00
400 watt power inverter center console outlet $60.00
Autometer Sport Comp II Boost gauge $60.00
Autometer Sport Comp II EGT gauge $170.00
Custom Roof Mounted Switchboard $27.00
JVC 2x DIN DVD Player customdash mounted A/V input $300.00
VIBE 6.5" front speakers $210.00
Cadence 6" coaxial rear speakers $119.95
Kicker KX Amp $250.00
Kicker Mono Class D Amp $300.00
JL Audio 13" W5 Sub / Enclousure $420.00

Total Extras $14,456.04

I also have brand new and in box a 1000 watt marine power inverter and PSC hydro assist with weld-on tabs, couplings, and hoses. Also there is the 37" spare tire that has never seen the floor with matching wheels. There is a Destaco latch and a Big Balls Offroad spindle to fabricate the spare tire carrier. Buyer takes all.

Punchlist:

1- install bumbstops or cut fenders.
2- make a plastic/fiberglass cover for winch controler box (the existing one is sheet metal)
3- valvecover breather is venting to atmosphere. Propane injection system plumbs in through existing hole in filter box. Oil catch can needed.
4- keyless entry not working. I have a new key but it has not been re-porgramed at the dealer.
5- Propane injection system charge port is located under vehicle.


Besides the punchlist items, the only thing this vehicle is missing is a front air/e locker. This vehicle is full-time 4WD. Needs a locker that is selectable and normally open.

Make me an offer ... you might be surprised!
 
great looking ride. good luck!
 
A bit of newb tech question, but noticed this line in the original post:
"Axle: K295 (80 series lug with 105 series calipers)"

Is this saying that the 105 series calipers will fit an 80 axle?
 
A bit of newb tech question, but noticed this line in the original post:
"Axle: K295 (80 series lug with 105 series calipers)"

Is this saying that the 105 series calipers will fit an 80 axle?

Yes they will but they will not clamp the discs completely. They do brake better than the 80 series calipers.
 
Thanks for all the comments.

The rig has been put back to stock and almost all the components have been sold.

Still up for grabs are the axles and 1HD-T engine.
 
gauge pods

does anyone know what make these gauge pods (used as pillar pods) are??
 

Users who are viewing this thread

Back
Top Bottom