97 FZJ80 Collecters Edition Part Out in NC Good Prices! (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 25, 2007
Threads
111
Messages
1,103
Location
Charlotte, NC
Location
United States
SOLD and gone Thanks!
fs%20lc%20001.jpg
fs%20lc%20003.jpg
fs%20lc%20005.jpg
 
Last edited:
These pics from the PO. I plan to take lots of pics shortly.
fs%20lc%20006.jpg
fs%20lc%20010.jpg
fs%20lc%20017.jpg
 
Last edited:
Man, that one looks familiar!!

I need:
the little cubby hole above the radio/CD player
a couple of tow hooks/loops
the spring clamps from the PCV hose and the other slightly larger hose just behind the PCV (4 total)
the brace at the top of the oil dipstick tube that holds the charcoal canister line

shipped to 37643, paypal $ at the ready

Thanks!
 
Last edited:
Man, that one looks familiar!!

I need:
the little cubby hole above the radio/CD player
a couple of tow hooks/loops
the spring clamps from the PCV hose and the other slightly larger hose just behind the PCV (4 total)
the brace at the top of the oil dipstick tube that holds the charcoal canister line

shipped to 37643, paypal $ at the ready

Thanks!

It prob is..bought it off here. :D

Cool. Let me make sure its all there still. $40 shipped good?

:cheers:
 
Yeah, I was really interested in the whole rig, but it turned out to not be white.

Let's make sure of parts and their conditions first, thanks!
 
Yeah, I was really interested in the whole rig, but it turned out to not be white.

Let's make sure of parts and their conditions first, thanks!

Cool. thats what I meant. :cheers:

I do have a white 97 80 I could rob parts off of, and put this silver on after some rattle can action. what do you need white?
 
Is it lifted? If so I would love to get the lift.
 
pics...
DSC03107.jpg
DSC03110.jpg
DSC03109.jpg
 
..........
DSC03108.jpg
DSC03112.jpg
 
bumper covers

How much for the bumper covers?
 
Interested in factory alarm - does it have it?

Not sure, but my trail-only 97 80 does and doesnt much need it without doors usually on it anymore, let me see how much pita to remove, i will PM you a price.

Thanks!
 
Awesome. I will need the three components since this will be an addition to my 80 (Alarm ECU [under driver's seat], T wiring harness and the glass breakage sensor). I think that is all of the parts. Thanks again.
 
I would like one of the tan grab handles with mounting screws, like the one over the front passenger door, if its in good condition.
 
Still looking for a rust free rear liftgate.Do you or could you post more pictures? Would like a price including shipping to 33418 PM me for phone # if needed. Thanks
 
I'm looking for either:

1) The entire set of buttons from the HVAC controller.

or

2) The HVAC controller itself.

I got a little too aggressive with the heat gun when removing that crappy wood trim! :doh:

Also, looking for the trim piece surrounding the center vent/clock if it's in good condition.

Thanks!
HVAC small.jpg
center trim small.jpg
 

Users who are viewing this thread

Back
Top Bottom