- Location
- United States
It's time to say goodbye to this, I can no longer let it sit unused.
Best Offer.
The hardware...
Completely rebuilt high performance 4.6L engine.
New Tacoma 6 speed manual trans
New Orion 4:1 t-case
New HD driveshafts
4:88 Gears
Factory lockers
New Bobby Long CV joints
New Poly front axle shafts
manual Aisin hubs
New PS pump with cutsom cooler
Steel wheels with nearly new M/T Baja Claws (5 of them)
OME Springs
Koni shocks, dual each wheel
Superwinch Husky, hi-po motor, Albright solenoids
Name the part, it has been replaced with new or rebuilt.
What it needs. The cable shifter for the t-case needs to be completed, the cables have been run into the cab. The body was clearanced for the 37" tires, this needs to be completed. One rear shock is missing, it was detroyed by a rock. It has deather wobble with the 37" tires, caster is adjustable, knuckles recently rebuilt.... ????
Build threads
https://forum.ih8mud.com/hardcore-corner/52322-fzj80-taco-6-speed-orion.html
https://forum.ih8mud.com/80-series-tech/28710-winter-hi-po-engine-project.html
https://forum.ih8mud.com/80-series-tech/15306-project-superwinch-husky-8-a.html
e-mail brian@jowettengineering.com
Best Offer.
The hardware...
Completely rebuilt high performance 4.6L engine.
New Tacoma 6 speed manual trans
New Orion 4:1 t-case
New HD driveshafts
4:88 Gears
Factory lockers
New Bobby Long CV joints
New Poly front axle shafts
manual Aisin hubs
New PS pump with cutsom cooler
Steel wheels with nearly new M/T Baja Claws (5 of them)
OME Springs
Koni shocks, dual each wheel
Superwinch Husky, hi-po motor, Albright solenoids
Name the part, it has been replaced with new or rebuilt.
What it needs. The cable shifter for the t-case needs to be completed, the cables have been run into the cab. The body was clearanced for the 37" tires, this needs to be completed. One rear shock is missing, it was detroyed by a rock. It has deather wobble with the 37" tires, caster is adjustable, knuckles recently rebuilt.... ????
Build threads
https://forum.ih8mud.com/hardcore-corner/52322-fzj80-taco-6-speed-orion.html
https://forum.ih8mud.com/80-series-tech/28710-winter-hi-po-engine-project.html
https://forum.ih8mud.com/80-series-tech/15306-project-superwinch-husky-8-a.html
e-mail brian@jowettengineering.com
Last edited: