91 3fe P/s pump (1 Viewer)

[80jay]

Hello, does anybody have any info on the easiest way to remove the power steering pulley from a 91 3fe? Mine started to blow out oil out of the front of it on my sunday wheelin trip and I need to remove the pulley so I can get the bolt out and replace the pump.

Thank you.

 

[cam75w/ls1]

I just went outside and looked at mine. Take the either 14mm or17mm nut out of the center of the pulley and remove. Should come right out. Sometimes they can be a little stubborn and have to tap lightly w/ rubber hammer from behind to get em off.

 

[cruiser88]

use a puller on your pump.it will not always come right off

 

[cruiser88]

http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=8832 try one of these.i use them

 

[80jay]

Thanks fellas

 

[80jay]

the only thing with the puller is there is not much room to work with in there.

 

[cruiser88]

the only thing with the puller is there is not much room to work with in there.

take the pump off

 

[80jay]

have to take the pulley off to get the pump off

 

[dd113]

take a TRE end tool, know as a pickle fork, and wedge it down between the pulley and the shaft. A few taps and it is off; taps, not whacks.

 

[80jay]

Thank you dd that sounds like a good idea.

 

[FloridaFJ80]

any luck with taking out your PS Pump.....

 

[80jay]

Have not recieved the new pump yet still waiting for the brown truck. have fun on the wheelin trip in Colombia send me pics