Wanted 9/72 fj40 carb or carb small parts (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 4, 2010
Threads
18
Messages
97
Location
Springville, Utah
Location
United States
In search of a few small parts or another carb itself after getting hosed on a rebuild.
3E88F255-54D7-4D90-A47C-FCE09B3FBCB3.jpeg
888D7991-A1FC-4878-B1D9-90123F065789.jpeg
 
Are you sure you want the linkage circled in the first photo? It normally goes in the scrap bin.

Don't install o-ring #891, it causes more problems than it helps.

Stopper # 27 can be fabricated from a nail.

HTH.
 
Are you sure you want the linkage circled in the first photo? It normally goes in the scrap bin.

Don't install o-ring #891, it causes more problems than it helps.

Stopper # 27 can be fabricated from a nail.

HTH.
I’m not sure. I don’t even know what it’s for 😂 just figured I’d rebuild this carb complete. I was mostly after the stopper and weight. Thanks for the info though! I sourced a carb and installed said parts. Seems to be running well so far!
Are you sure you want the linkage circled in the first photo? It normally goes in the scrap bin.

Don't install o-ring #891, it causes more problems than it helps.

Stopper # 27 can be fabricated from a nail.
 

Users who are viewing this thread

Back
Top Bottom