80 Series Toyota Oil Filter Options (2 Viewers)

[Greg_B]

BCR4619 how much for those Donaldson filters - they are for the Yanmar marine 1HDT?

Donaldson Filter Cross Reference and Application Search - My Results

Seems so. They also cross it up to 90915-03006 though. Which brings us back to the beginning of this thread. Is this the endless loop?

Some crossover part numbers:

Toyota - 90915-30002
Baldwin - BD 7029
Ryco Z334
Donaldson P55-0413 - Now 550597
Fleetguard LF 3608
Wix 57254 (Napa NGF 7254)

gb

 

[4G63 POWER]

For Sale - Toyota oil filters 15600-41010

 

[Kruiser Kat]

I've read this thread over about 4 times, and several other mud threads on oil filters...and am "muddy" on a few things....(OK, bad pun)
The other threads say the -20004 from Japan is preferred, but now virtually unavailable (UAE may have some, but not confirmed).

This thread says the -30002 (from Japan) would be preferred, and I see it is availalbe on Amazon (US too).
I don't understand why the other threads don't mention the 30002....perhaps it wasn't out in 2014-2015 when those were written?

I just got a '96, FZJ80, with 1FZ-FE, gasoline, (193,000 miles), going to run 100% synthetic Rotella T6, 15w-40.

--->>> Is the -30002 OK to use on mine? (I don't care about price!---I want the best for the truck)
THX!!

 

[fisherman978]

I've read this thread over about 4 times, and several other mud threads on oil filters...and am "muddy" on a few things....(OK, bad pun)
The other threads say the -20004 from Japan is preferred, but now virtually unavailable (UAE may have some, but not confirmed).

This thread says the -30002 (from Japan) would be preferred, and I see it is availalbe on Amazon (US too).
I don't understand why the other threads don't mention the 30002....perhaps it wasn't out in 2014-2015 when those were written?

I just got a '96, FZJ80, with 1FZ-FE, gasoline, (193,000 miles), going to run 100% synthetic Rotella T6, 15w-40.

--->>> Is the -30002 OK to use on mine? (I don't care about price!---I want the best for the truck)
THX!!

did you end up going with the 20002? just in the same perdicament wondering the best filter option for my newly acquired 93 gas 1fz

 

[4G63 POWER]

 

[fisherman978]

does the toyota oil filter is this the one recomended for the 1fze or the diesel? thanks in your opinion is it worth it to spend the 30$ for one

 

[4G63 POWER]

It's for diesel engines, hence the twin element. I would just use the single element denso 150-2066 for the big capacity. It's $7.32 on amazon.

 

[fisherman978]

I've read this thread over about 4 times, and several other mud threads on oil filters...and am "muddy" on a few things....(OK, bad pun)
The other threads say the -20004 from Japan is preferred, but now virtually unavailable (UAE may have some, but not confirmed).

This thread says the -30002 (from Japan) would be preferred, and I see it is availalbe on Amazon (US too).
I don't understand why the other threads don't mention the 30002....perhaps it wasn't out in 2014-2015 when those were written?

I just got a '96, FZJ80, with 1FZ-FE, gasoline, (193,000 miles), going to run 100% synthetic Rotella T6, 15w-40.

--->>> Is the -30002 OK to use on mine? (I don't care about price!---I want the best for the truck)
THX!!

after researching he 30002 is for the diesel engine, not the 1FZE im still unsure as to what oil filter is recomended for the 1fze gasoline OEM . i purchased 2 - 5QT 5W 30 high mileage , Toyota OEM plugs wires , air filter , cap and rotor. but i need to buy the filter i have about 10 Toyota oil filters for my Tundra and 100 series 90915 Yzzd1 but i don't want to use them on the 1fze if theres a preferred filter.

 

[Caaarlo]

Disassembly of the FRAM PH5123 oil filter (replacement for Toyota 30002) and also some fitting considerations for not screwing up the inner seal (yes there is an internal seal that it is worth lubing before fitting)

Oil filter 30002-8T

A bit of new info on the filter design: The filter consists of one full-flow and one bypass element, so that more of the oil is filtered. The oil through the bypass element goes straight back to the sump when the pressure is higher than what the lubrication areas require.

forum.ih8mud.com

 

[veiloctane]

has anyone used or cut open some of the cheaper Japanese compatible oil filters there's so may choices on partsouq anyone have experience in these alternative brands?

 

[Greg_B]

A Union Japan filter is cut open in this thread.

hth's
gb

 

[veiloctane]

Does anyone have a cutaway of this filter I have always Occasionally bought stuff from @Radd Cruisers they have been great.

I am curious to see what is on the inside.