80 Series stainless filler necks (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

OTRAMM

Supporting Vendor
Joined
Jul 31, 2006
Threads
66
Messages
1,419
Location
Warrenton, VA
Website
www.otramm.com
These have been on the back burner for a while. Finally settled on a design I like and we've done a few installs at the shop to verify fitment. Our kit replaces the horizontal portion of the filler neck that commonly rusts through. It splices in to the vertical portion removing the need to lift the body for replacement. It's a fairly quick and easy install with a chain cutter being the only specialty tool needed. (to cut the stock filler without making sparks). The kit comes with the necessary clamps and hoses. The tubing is 16 gauge 304 stainless. Back purged and TIG welded with retention beads rolled on the filler tube. The bracket is 1/8" 304 stainless. Filler Neck

fillernecktable.jpg
 

Users who are viewing this thread

Back
Top Bottom