- Joined
- Dec 20, 2007
- Threads
- 127
- Messages
- 1,070
- Location
- Orcas Island in NW Washington State
- Website
- www.mtpickettwoodworking.com
I have my 2f running nicely in my 55 chassis. Hooked up the radiator yesterday but can't tell where to draw water from the water pump for the oil cooler. I pretty much cut all the old 5/8" hose when I stripped the body off. To get this project under way I plan on no heater at first, so all the cut off hoses have been plugged with a 5/8 bolt and hose clamps. No leaks in the system but need the routing for the oil cooler lines. It's been over 20 years since I used my factory service manual, but now I can't find it for the life of me. Thanks in advance. GB