77 FJ40 gasket (1 Viewer)

[jason ladd]

any ideas on what gasket i need for the circled area between the air cleaner? (circle a little off-center)
i have already installed

carb gasket #17848-61011.

 

[3_puppies]

is that a weber? maybe find it from someone who sells/deals with webers?

 

[flee]

Is it possible that another gasket just like the one on the base of that ring would fit there?

 

[jason ladd]

Is it possible that another gasket just like the one on the base of that ring would fit there?

i'll check and see!

 

[brian]

Dump the weber and work from the intake up..

 

[flee]

Unless you're building an accurately restored vehicle the Weber carbs work just fine and are very tunable for modding the engine.

 

[brian]

no, webers are just junk

 

[flee]

Oh well...
Sometime it's the magician not the wand.

 

[jason ladd]

what is the best source for an OEM Carb?

 

[Tancruiser]

I’ve Had a Webber on my 40 for 25 years without any issues .

 

[brian]

city racer.
the 21100-61012....it's basicly the oe desmog carb, really it's the no smog carb. it just has so much more to offer than a weber....which is too small for the 2F.....i went from a 38/38 to oe, it's night and day different.
i'm getting around 16mpg, it runs better than it ever did with the weber, and i could probably down size the main and secondary jets yet.

 

[flee]

Don't forget that you'll need to recreate the OEM accelerator pedal linkage if returning to an OEM carb.

Getting back to Jason's original question, you could make a gasket for that with 1/4" foam tape or even cardboard.