Builds 68' M715, AKA "Smokey" (Can I post this Jeep on MUD?) (5 Viewers)

[Rock40]

Clutch master and pedal retrofit

Clevis made out of stainless bits

 

[Rock40]

Pedal alignment

UHMW spacer for the master

Added a rubber pad

Bottoms against the floor

 

[Rock40]

Working on the rear axle shock mounts

1.5” DOM mounts. These are King 2.5’s with 16” of travel. Rear are triple rate

Full bump driver, full droop passenger

 

[Rock40]

They are big hoops but I guess that’s what you get when you have 16” King’s on a truck with nearly no lift

 

[Rock40]

Front King shock mounts...

 

[Rock40]

Cross bar...

 

[Rock40]

And after about 2 years, it’s finally rolling

 

[mr jits]

And after about 2 years, it’s finally rolling

I think it needs bigger tires....

 

[Rock40]

I think it needs bigger tires....

Haha! I think I still want it to steer

 

[Rock40]

Old bed is off to the blaster...

And it’s back...

Completely broken up bed corners

 

[Rock40]

Garage mouse trap

Cutting the bed for the coil overs...

Marking the rear of the bed to bob it. Shortened it 22.25”

Removing all the extra bits that were in the way...

 

[Rock40]

Marked for shortening

Off it goes

Cleaning up the rear crossmember

 

[Rock40]

Bed splicing....

Rear section

Putting it back together...

 

[Rock40]

Installed

22.25” shorter

 

[Rock40]

We’re at the end of a 5 day wrench fest, 12 hour days on this, pretty tired

Thanks for the swag Filthy Motorsports!

 

[Grandlooser]

Def one of the best threads going. Awesome work.


P.S. You know you could make even better progress if you didn't TIG weld EVERYTHING on the truck?..

 

[CreeperSleeper]

Looking great, Ross! I can't wait to see this thing on the trail.

 

[Rock40]

Def one of the best threads going. Awesome work.


P.S. You know you could make even better progress if you didn't TIG weld EVERYTHING on the truck?..

THANK YOU. Yeah the TIG is slow but I’d never done it prior to this build. Part of the goal was building skills. And any weld just about beats the factory ones from 68’ good grief. They look like they were done in a Friday afternoon by someone who’d been drinking on the job

 

[Rock40]

Looking great, Ross! I can't wait to see this thing on the trail.

Thanks Chad! I’m looking forward to it. Just needs WIDE trails

 

[Rock40]

Here’s a better shot of how we married the bed after shortening it. Inside cut eliminated the need to splice the horizontal bed surface. Pretty slick

Finally quit pouring rain this afternoon so I was able to push this out of the shop for some better overall pics

I suspect this will be a very good hill climber. Overall wheelbase is 124”