64 45 SWB floor boards (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 6, 2007
Threads
48
Messages
246
Location
Lake Tahoe,
Anyone know where I can find 64 floor board replacements. The Only panels I can find are round ended the 64 floor panels are square.

AF7AF1D6-E3FF-4370-A177-2FE5610E3C0A.jpeg


56DA2133-3143-486E-B5FD-D443C24221A8.jpeg


D2075A46-DDA7-4F08-A7B6-61575BF2983D.jpeg
 
Unfortunately I don’t believe anyone is reproducing 45 floor pans with the squared ribs. You could likely use the rounded ones and use a hammer and dolly to “ persuaded” them into being square. If not that a cut off wheel and welder would certainly fix it.
 
You can make them yourself, they are not that hard to do.
a basic bead roller some thick wall tube that fits over the shafts of the bead roller and large thick Washers.
1A86B813-6945-4B66-A3E3-6BD52C8006CE.jpeg

You can add a layer between the outside washers to flatten the top of the bead.
A4802654-5D0A-49CE-B647-BD8EF01AAA30.jpeg


60C4A5AD-96AE-4D82-BCA0-4301F07D8174.jpeg

just keep in mind that the deeper the ribs the more distortion of the part. As your part is flatwith absented edge on one side it should be fine. The distortion flattens out when you weld it to the tub.
 
Last edited:
All you need is a hammer to do this easy ribs :) ... not more.
If you want to see what real handmade is.... visit the Morgan factory in Malvern.


Just an example.....handmade louvers. Think it´s a bit more complicated to do them than the easy Toyota ribs.


... and if your handmade ribs are not as perfect as machine made ribs.
Who cares.... later you put rubber mats in ...anyway...
& nobody see it under your new stylish Toyota rubber mats. ;)
 
Last edited:

Users who are viewing this thread

Back
Top Bottom