During a knuckle rebuuild I noticed a lot free play and movement on my drivers side hub.
Last edited:
62 Aisin Hub Slop
- Thread starter cruiserjunktion
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #2
I tore it down and found:
(a) Looks like this inner ring broke allowing side to side movement
(b) The ring it is housed in also has a groove worn into it
(c) Possible damage to gear
Anyone ever seen this before?
Opinions on repair.
Everything else in the hub looks fine.
(a) Looks like this inner ring broke allowing side to side movement
(b) The ring it is housed in also has a groove worn into it
(c) Possible damage to gear
Anyone ever seen this before?
Opinions on repair.
Everything else in the hub looks fine.
Last edited:
- Thread starter
- #3
a
b
c
Are replacements availible?
b
c
Are replacements availible?
Last edited:
I believe that Aisin hubs from other vehicles (i.e. Isuzu Trooper) share many of the same internal parts as the 60/62 hubs. ASAIK replacement parts are not available.
