- Location
- United States
I have one complete set of rear shoulder belts for the 60 series. These are the later style, with the retractor on the shoulder belt, not the lap belt. Includes the belts, retractors, and all the trim pieces for both sides--everything needed to install completely. Color is gray.
$200 firm (plus actual shipping).
If you have an fj62, these are bolt in--unless you have a very early 1988 fj62, in which case you may have to do what fj60 owners do. And speaking of which: 60 owners will have to 1) verify that the C-pillar has the threaded nut in place to attach the shoulder belt anchor (most do) and 2) enlarge the existing pocket just above the wheel well to fit the retractor and drill a couple holes to hold it in place. There have been plenty of threads on MUD about this so do a search if you are unsure, but it is not hard at all.
Thanks!
Timoss
88 fj62 TLCA
$200 firm (plus actual shipping).
If you have an fj62, these are bolt in--unless you have a very early 1988 fj62, in which case you may have to do what fj60 owners do. And speaking of which: 60 owners will have to 1) verify that the C-pillar has the threaded nut in place to attach the shoulder belt anchor (most do) and 2) enlarge the existing pocket just above the wheel well to fit the retractor and drill a couple holes to hold it in place. There have been plenty of threads on MUD about this so do a search if you are unsure, but it is not hard at all.
Thanks!
Timoss
88 fj62 TLCA
