60 Engine Oil Cooler question: (1 Viewer)

[WSOPgold2012]

part # 15710-61010

If leaking is it easy enough to swap out the rings or just replace?

Thanks

 

[Spike Strip]

Vague question.

Yes, cooler body is easy to replace. Depends on where it's leaking if needs replace. If body is rusty mess, then yes. The 'Unions' or bolts that hold it on the block have O-rings and copper washers. Rings are available from Toyota. Washers NLA. Rings are easy to replace, if that's where it's leaking. Unions are NLA.

 

[WSOPgold2012]

Vague question.

Yes, cooler body is easy to replace. Depends on where it's leaking if needs replace. If body is rusty mess, then yes. The 'Unions' or bolts that hold it on the block have O-rings and copper washers. Rings are available from Toyota. Washers NLA. Rings are easy to replace, if that's where it's leaking. Unions are NLA.

its a rusty mess.... going to grab a new OEM cooler.... have a source? thanks

 

[WSOPgold2012]

Vague question.

Yes, cooler body is easy to replace. Depends on where it's leaking if needs replace. If body is rusty mess, then yes. The 'Unions' or bolts that hold it on the block have O-rings and copper washers. Rings are available from Toyota. Washers NLA. Rings are easy to replace, if that's where it's leaking. Unions are NLA.

Rusty mess?

 

[Spike Strip]

Well, you can replace it, if it's getting thin in areas and prevent any future leaks, but I've seen worse... City Racer has an aftermarket one that's cheaper. Do the O rings while you're at it. Clean up the copper washers and the Unions (bolt with holes in 'em).

edit: Nevermind, sold out.

Oil Cooler for Land Cruiser FJ40 FJ60 FJ62 FJ80

Aftermarket oil cooler for '76 to '92 Toyota Land Cruiser FJ40, BJ40, BJ42, FJ60, HJ60, FJ62, FJ80. Direct replacement for OEM part # 15710-61010 at great savings. Gasket and o-ring are available separately.

www.cityracerllc.com

 

[WSOPgold2012]

this: 15710-61010 GENUINE OEM OIL COOLER ASSY 1571061010 | eBay - https://www.ebay.com/itm/15710-61010-GENUINE-OEM-OIL-COOLER-ASSY-1571061010-/173099784025

from SHARJAH, EMIRATES, United Arab Emirates which is a lil skurrry or

Oil Cooler for Land Cruiser FJ40 FJ60 FJ62 FJ80

Aftermarket oil cooler for '76 to '92 Toyota Land Cruiser FJ40, BJ40, BJ42, FJ60, HJ60, FJ62, FJ80. Direct replacement for OEM part # 15710-61010 at great savings. Gasket and o-ring are available separately.

www.cityracerllc.com

After mkt from City Racer.

will there be a significant difference to spend $150 ish + for OEM?

 

[Spike Strip]

Dunno. Never seen the CityRacer one. Maybe someone can chime in.

 

[WSOPgold2012]

Vague question.

Yes, cooler body is easy to replace. Depends on where it's leaking if needs replace. If body is rusty mess, then yes. The 'Unions' or bolts that hold it on the block have O-rings and copper washers. Rings are available from Toyota. Washers NLA. Rings are easy to replace, if that's where it's leaking. Unions are NLA.

Thoughts on this used OEM cooler? Looks clean....

 

[Spike Strip]

Looks good.

I put a used one on mine 10 yrs ago and no issues, long as it's sound