60 C-Channel Repair Rails (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

TRAIL TAILOR

Enabler
Supporting Vendor
Joined
Jun 21, 2011
Threads
224
Messages
20,883
Location
Redding, California
Website
trail-tailor.com
For all of you that need to strengthen that rusty rear frame back up..

3/16" channel reinforcement rails with Grade 8 hardware 190.00 Shipped .. With 18-8 Stainless Steel hardware 200.00 shipped.

These are bare metal and shipped with a 1/2" step bit to assist in the install.

I am trying to locate a 62 frame to get the dimension on the 3 end bolts. all holes line up on a 60/62. The 62 has a few more holes on the vertical face.

Let me know if you have any questions.

Thanks for looking,

Jason

IMG_20150204_131323_738.jpg
IMG_20150204_131333_040.jpg
IMG_20150204_131414_021.jpg
IMG_20150204_131426_595.jpg
IMG_20150204_134132_425.jpg
 
Those are for an FJ62?
 
I remember you mentioning that you had an FJ62 donor frame on its way so you could produce these for an FJ62, apparently they aren't the same as the FJ60 but I'm not sure how exactly.

Anyways they look great, my 100% Florida frame doesn't need them YET but they are starting to weave a little bit... I'll let you know when the time comes. Not looking forward to that project. Probably better to just swap an 80 frame/coils under!

EDIT Just re-read the your original post.
 
Last edited:
Double post!!
 
Last edited:
Triple post!!
 
If you're thinking about these for your rig They are a great solution! Mine worked out great! Thanks Jason!
 
Do you still make these steel c - channel reinforce ments?
 
Reevesci, I have an 87fj, the PO cut out the rear crossmember leaving the diagonal parts riveted on both sides I'm restoring my truck and I don't know how difficult it is to find an OEM replacement. Have you ever had a request to make them? Thanks
 

Users who are viewing this thread

Back
Top Bottom