Wanted 60/62 Tranny cross-member brackets

[davegonz]

Location

United States

I have already sourced the main FJ60 cross-member, but need the two side brackets that bolt to the frame. Anyone have any? I was going to use some angle iron and make my own, but I'm really pressed for time these days.

Thanks,

 

[landcrusher909]

Give us a week or so to get them un bolted. Shoot me a PM or I will forget LOL

 

[3_puppies]

I have already sourced the main FJ60 cross-member, but need the two side brackets that bolt to the frame. Anyone have any? I was going to use some angle iron and make my own, but I'm really pressed for time these days.

Thanks,

I'm confused. do you want the early 60 brackets that bolt to the inside frame rails? they were used up to 84 until the spacer transmission came out then the crossmember was longer and bolted to brackets welded on the inside and outside of the frame rails. the crossmembers are different as the later also rotates the trans slightly to go with the 3F bellhousing. and is longer.

 

[davegonz]

Yes, the early side brackets. I already sourced the main cross member.