kelly saad
Supporting Vendor
The project:
1. Disassemble vehicle, remove doors, tailgate and hatch.
2. Strip entire vehicle to bare metal, including jambs.
3. Replace hatch and tailgate.
4. Remove seam sealer in roof gutters, and windshield area, repair all rust.
5. New lower door skin replacement panels, Sand blast remaining rust, new seam sealer.
6. New quarter panels, remove the previously replaced panels and any rusted sections of inner fenders.
7. Install sound dampening/insulation in doors, and floor.
8. Paint jambs and install doors, hatch and tailgate.
9. Exterior paint, B/C or single stage, wet sand, and polish.
10. Install new sliders, and bumpers.
Original paint was Brown, and we will be restoring this one back to is original, glorious color.
1. Disassemble vehicle, remove doors, tailgate and hatch.
2. Strip entire vehicle to bare metal, including jambs.
3. Replace hatch and tailgate.
4. Remove seam sealer in roof gutters, and windshield area, repair all rust.
5. New lower door skin replacement panels, Sand blast remaining rust, new seam sealer.
6. New quarter panels, remove the previously replaced panels and any rusted sections of inner fenders.
7. Install sound dampening/insulation in doors, and floor.
8. Paint jambs and install doors, hatch and tailgate.
9. Exterior paint, B/C or single stage, wet sand, and polish.
10. Install new sliders, and bumpers.
Original paint was Brown, and we will be restoring this one back to is original, glorious color.