Wanted 58-67 carb insulator plus more parts (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

pardion

SILVER Star
Joined
Nov 5, 2005
Threads
361
Messages
5,472
Location
Camino, California
Location
United States
Looking for a few F parts;
1 bbl carb base insulator with PCV tube.
FOUND IN SQUAW VALLEY
Heat riser manifold gasket between intake and exhaust. FOUND AT REMFLEX

1 bbl gasket for the top of carb.

1bbl air cleaner to carb clamp and bolt.

PM here or e-mail pardion@comcast.net
Thanks, John
 
Last edited:
Looking for a few F parts;
1 bbl carb base insulator with PCV tube.

Heat riser manifold gasket between intake and exhaust.

1 bbl gasket for the top of carb.

1bbl air cleaner to carb clamp and bolt.

PM here or e-mail pardion@comcast.net
Thanks, John

John, the Ford 300cid engines from the 70’s use almost the same gaskets and carb spacers as the old f135’s. The only difference might be a smaller mounting hole diameter, but you can easily punch them out bigger. You won’t be able to find a carb spacer with a PCV port, but it may be something you could fashion yourself.

Edit: just reread and realized you’re looking for the gasket on top of the carb. IIRC, I see those on eBay regularly.
 
Is this what your looking for? 1 bbl gasket for the top of carb.

let me check but might have the carb base with PVC tube
 
one side has some chips in it, could maybe be fixed with some kind of JB weld?
IMG_9167.jpeg
IMG_9168.jpeg
IMG_9170.jpeg
IMG_9168.jpeg
 

Users who are viewing this thread

Back
Top Bottom