kelly saad
Supporting Vendor
This will be painted the same color green.
The project:
1. Disassemble vehicle, remove doors, tailgate and hatch.
2. Strip entire vehicle to bare metal, including jambs.
3. Replace passenger side door.
4. Remove seam sealer in roof gutters, and windshield area, repair all rust (A pillar is bad) seal again
5. New lower door skin replacement panels, Sand blast remaining rust, seal bare metal with POR-15 products, new seam sealer.
6. New quarter panels and any rusted sections of inner fenders.
7. Paint jambs and install doors, hatch and tailgate.
8. Exterior paint, B/C or single stage, wet sand, and polish.
9. Install new sliders, and bumpers.
The project:
1. Disassemble vehicle, remove doors, tailgate and hatch.
2. Strip entire vehicle to bare metal, including jambs.
3. Replace passenger side door.
4. Remove seam sealer in roof gutters, and windshield area, repair all rust (A pillar is bad) seal again
5. New lower door skin replacement panels, Sand blast remaining rust, seal bare metal with POR-15 products, new seam sealer.
6. New quarter panels and any rusted sections of inner fenders.
7. Paint jambs and install doors, hatch and tailgate.
8. Exterior paint, B/C or single stage, wet sand, and polish.
9. Install new sliders, and bumpers.