OK so i have an 89 with the mechanical t-case for 4wd. I replaced the detent spring that was recommended on one of the posts here. It made it better and isn't slipping out as bad, but will still randomly disengage sometimes. When replacing spring, I didn't check to see if ball was still in there, would it engage at all if that wasn't there? Also the tip of the old spring was pretty rough and was bent. Any thoughts on this?
Any one looking for the spring the part number on the pic is correct but it won't come up in any searches even the parts guy at Toyota couldn't find it. You can find with the item description though.
Any one looking for the spring the part number on the pic is correct but it won't come up in any searches even the parts guy at Toyota couldn't find it. You can find with the item description though.