SOLD 4spd tranny gears and trans case

[Hoperichb]

Location

United States

Pulled from my ‘76. Numbers are inverted but look to cooroborate. Cracked transmission case and traded off the top plate. Gears may be of use to you.

Transfer case. Never used due to condition of trans. All shifts fine by hand. Can separate. Let me know if you are interested and can take off the side cover for pictures of gears.

Does not include parking brake housing- need to pull this for my backup and will be removed.

Will to part out. $150 on ohio

 

[orangefj45]

Can you pull the top cover on the Tcase to check the gears?
I'd be interested in the entire Tcase.

Georg @ Valley Hybrids & Cruiser Brothers
Shop 209-475-8808

 

[Hoperichb]

Hey George,

Someone interested in the Transmission gears/shaft, traded off the nose cone on the transfer. I will crack open the cover tonight and pass you some photos if you are still interested. I am sure we can work something out.

Ben

 

[Hoperichb]

Hey George,

Here is how the inside looks. Nosecone gone. Shoot me a PM if interested.

 

[65swb45]

Ben

It will be helpful to shift the hi lo shifter into lo range to see the condition of the high speed gear. Also a brighter light wouldn’t hurt.

 

[Hoperichb]

Hope this helps.

 

[65swb45]

Also interested.

 

[Hoperichb]

Need to pull off the tranny and parking brake over the weekend. Not sure on shipping- hopefully you have an account or business address, both help.

Would be interested in a trade of some sorts. Need a good working Dash cluster for my '76. Also interested in a confer rack. (Mark, saw I missed your good one a few weeks back.)

Shoot me a PM or call and we can work out a trade or sale. 330-831 three four three o

Ben

 

[orangefj45]

Thanks for the reply and pics. Since the nosecone is gone I'm going to have to pass.

Georg @ Valley Hybrids & Cruiser Brothers

 

[65swb45]

I have plenty of nose ones, but I’d like it a lot better if you could run some gasoline or mineral spirits over those gears to make sure there are no shadow marks on the teeth.

 

[Hoperichb]

Thanks George.

Hey Mark, I can do that. Let me get back to you.

Ben

 

[MIKKELSEN]

I’m interested in it if it’s the 16 spline tcase. The one in my project is toast and I need another to replace it. Let me know if Mark passes.

 

[Hoperichb]

Doing my best on the photos.

 

[65swb45]

That's good enough. My ship zip is 91502. Figure out what shipping's going to run, and then add in what you think the partial case is worth and shoot me a price. I'm good cash, PayPal, or trades.

 

[Hoperichb]

That works. Give me until after the holidays to break it apart and get a good estimate on it.

Planning for a project or stock? Let me know if you need it sooner.

Opposed to Greyhound shipping? I could build a small wooden crate for it without any impact to cost. Ive shipped greyhound from CA without issue, just took forever.

 

[65swb45]

No rush here. @Biscuit left one with me a month ago for stock I haven’t got to yet.

 

[3_puppies]

Opposed to Greyhound shipping? I could build a small wooden crate for it without any impact to cost. Ive shipped greyhound from CA without issue, just took forever.

plastic tote work very well for this situation. drill some holes thru the top and bottom and use tie wraps. I've shipped several this way.

I was in Costco the other day and they have pairs of smaller totes already with the holes around the lid. I've used there larger ones also.

 

[Hoperichb]

STill have this to break apart. Having trouble locating bolts long enough to work with my puller. May have to source online or order to store.

More to come.....

 

[Hoperichb]

Mark,

Last photos. All hardware included minus one rear cover bolt- not sure where it is laying around at. Will give you a call today to make arrangements.

 

[1MOA]

plastic tote work very well for this situation. drill some holes thru the top and bottom and use tie wraps. I've shipped several this way.

I was in Costco the other day and they have pairs of smaller totes already with the holes around the lid. I've used there larger ones also.

drain it wrap it in a plastic bag then put it in a tote then fill the tote with spray in foam and let it set then put the lid on it and ship. it will not move and will not leak.
Pain to remove but just take a razor cutter and slice it open and it's good to go.