JDNs78FJ40
SILVER Star
- Location
- United States
These are the original drum brakes from my nut and bolt body off restoration. Decided last minute to go a different direction with rear brakes. The backing plates were blasted, treated with por15 and the outside part had a chassis black topcoat applied The original backing plate bolts, nuts and washers were re-zinced. The drums were blasted and powder coated. The painter did mess up and paint the inside but I had them measured today and they can be turned and there is a lot of meat left. The springs in the hardware were plated
Backing plates $50 a piece
Drums $40 a piece
Bolts, washer and nuts $2 per set
Brake lines $15
Springs and misc hardware pictured $20.
Buyer pays shipping and I would prefer to sale the drums together and the backing plates together.
Backing plates $50 a piece
Drums $40 a piece
Bolts, washer and nuts $2 per set
Brake lines $15
Springs and misc hardware pictured $20.
Buyer pays shipping and I would prefer to sale the drums together and the backing plates together.
