A little 52" x 32" Bak Pak Rak for a customer. These are a great little rack for the back end of any cruiser or gutter style vehicle.
J
View attachment 1527567
Did this person ever post pics of the rack on their cruiser ?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
A little 52" x 32" Bak Pak Rak for a customer. These are a great little rack for the back end of any cruiser or gutter style vehicle.
J
View attachment 1527567
Did this person ever post pics of the rack on their cruiser ?
M,
No I never got pics back. He wasn't a MUD guy to my knowledge. I may have some pics of one on a D2 or RRC.... I'll PM you if I find it.
J
For the FJ60 roof rack mounts, can you make the mounts longer inboard towards the centerline of the truck? I've got a roof rack that I like, but it's sheet metal screwed to the roof. Also, how wide is the mounting surface?
If you're willing to make a custom set, I need six for my roof rack.
How much further inboard do you need them? How wide is your rack?
J. Can ya make a removable larger wind deflector for peeps runnin rtts? Light aluminum engraved with landcruiser? Thanks as always MikeYes, I have plans for the 100 and 200 alike. @Kmonty66 has my old Esme rig and I'll use it for prototyping in a few weeks once it comes back up for a front bumper and skidplates.
The 60 rack was test fit today and I'll have it finalized by the weekend.
Jason
View attachment 1608845 View attachment 1608846 View attachment 1608847 View attachment 1608848 View attachment 1608849
43.5" center to center.
Those 60 series rack look amazing. Very low profile and tough looking. So does the rack actually rest along the entire gutter channel to provide the most support?
Would this be something similiar that could be done for a BJ74 to take advantage of the entire rear and front gutter mounts to distibute the load all the way?
man those are some nice racks. hopefully i will be able to afford one if i ever get my 60 on the road.Guys, as the new year brings changes for Trail Tailor's line up... With focusing on RACKS AND SLIDERS from here on out, I was able to further negotiate shipping and bulk materials. So, as in the past, I will pass the savings down to all of you.
All racks are built from 1" x .083" HREW tubing. 3/4 and full length racks for 40, 55, 60, 70, 80, 100 and 200 (including the LX570) series. Expo, basket and flat platform racks. I have designed an adjustable height gutter or rail mount for each of these series.
AND AS ALWAYS, I will TAILOR any rack to your specs within reason.
Thank you for all your continued support and please let me know if you have an inquiry on pricing or questions..
BARE METAL PRICING ONLY...
Full-- 52" x 84"
Custom sizes available upon request
Full-- 52" x 84"
Custom sizes available upon request. Please PM or email me jason@trail-tailor.com
Full length flat rack w/ 6 mounts and plates $725.00
Full length expo w/ 6 mounts and plates 790.00
Full length basket w/ 6 mounts and plates $860.00
Add additional mounts and plates $80.00 per pair
40, 55, 60, 70 and 80 adjustable gutter mounts 30.00 each
61 HighTop Gutter mount $40.00 each
100 series mounts $30.00 each
Mount plates (corner or straight) $10.00 each
3/8" stainless steel hardware mount kits $25.00 (6 mount) $28.00 (8 mounts)
Lights tabs $6.00 a pair
Sunroof cut-out $40.00
1/2" flattened mesh floor Full Floor- $150.00
1/2" flattened mesh floor 1/2 Floor $75.00
BLACK - SEMI GLOSS POWDERCOAT -- $180.00
60 Expo with additional mounts
Custom 61 High Top
80 LO-PRO with sunroof cutout (OE rails removed)
View attachment 1223611
80 Full Custom Basket (std height- OE rails not removed)
View attachment 1223612
100 Flat with sunroof cutout
View attachment 1393283
40 Custom (rack follows roof perimeter- not rectangle)
View attachment 1223618
80 Basket -3/4 length (std height)
View attachment 1223619