40-55-60-70-80-100 & 200 Roof Racks and Mounts (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

J. How much for the 200 front bumper, new slim roof rack and sliders. Need to start tsome of these soon. Trip is in June. Mike
 
Stainless gutter clamps arrived today for the new rack.

J

IMG_20180118_133200294.jpg
IMG_20180118_133220450.jpg
IMG_20180118_133149561.jpg
 
For the FJ60 roof rack mounts, can you make the mounts longer inboard towards the centerline of the truck? I've got a roof rack that I like, but it's sheet metal screwed to the roof. Also, how wide is the mounting surface?

If you're willing to make a custom set, I need six for my roof rack.
 
For the FJ60 roof rack mounts, can you make the mounts longer inboard towards the centerline of the truck? I've got a roof rack that I like, but it's sheet metal screwed to the roof. Also, how wide is the mounting surface?

If you're willing to make a custom set, I need six for my roof rack.

How much further inboard do you need them? How wide is your rack?
 
This is definitely the rack I want. Can’t wait till I can make it a reality. Maybe next time I’m up that way I’ll try and swing by. Paradise native here.
 
Yes, I have plans for the 100 and 200 alike. @Kmonty66 has my old Esme rig and I'll use it for prototyping in a few weeks once it comes back up for a front bumper and skidplates.

The 60 rack was test fit today and I'll have it finalized by the weekend.

Jason

View attachment 1608845 View attachment 1608846 View attachment 1608847 View attachment 1608848 View attachment 1608849
J. Can ya make a removable larger wind deflector for peeps runnin rtts? Light aluminum engraved with landcruiser? Thanks as always Mike
 
Love the products!! In the market for a rack for the new RTT. Your profile says Redding, but I saw in an earlier post you were in making everything in Wy or somewhere...? Where are you located now? Redding is local for me, so I was curious.
 
Those 60 series rack look amazing. Very low profile and tough looking. So does the rack actually rest along the entire gutter channel to provide the most support?

Would this be something similiar that could be done for a BJ74 to take advantage of the entire rear and front gutter mounts to distibute the load all the way?
 
@reevesci I hope your doing alright up there with all those fires burning in Redding. Be safe brotha.
 
Those 60 series rack look amazing. Very low profile and tough looking. So does the rack actually rest along the entire gutter channel to provide the most support?

Would this be something similiar that could be done for a BJ74 to take advantage of the entire rear and front gutter mounts to distibute the load all the way?

Similar to this FRP

C-BO.png

IMG_0761.JPG
 
Reevesci,

More something like what you did here for the 60. Instead of a tube style. Not sure if there would be enough of a desire for this though to make it worthwhile.

I am actually looking into getting a rack that is built into my rear bumper and the sliders so I can carry more weight and keep the rack attached when I run without the FRP top

Hope everything is going as good as it can be with those fires. Stay safe

IMG_20180111_095636703.jpg
 
Guys, as the new year brings changes for Trail Tailor's line up... With focusing on RACKS AND SLIDERS from here on out, I was able to further negotiate shipping and bulk materials. So, as in the past, I will pass the savings down to all of you.

All racks are built from 1" x .083" HREW tubing. 3/4 and full length racks for 40, 55, 60, 70, 80, 100 and 200 (including the LX570) series. Expo, basket and flat platform racks. I have designed an adjustable height gutter or rail mount for each of these series.

AND AS ALWAYS, I will TAILOR any rack to your specs within reason.

Thank you for all your continued support and please let me know if you have an inquiry on pricing or questions..



BARE METAL PRICING ONLY...

Full-- 52" x 84"
Custom sizes available upon request


Full-- 52" x 84"
Custom sizes available upon request. Please PM or email me jason@trail-tailor.com


Full length flat rack w/ 6 mounts and plates $725.00
Full length expo w/ 6 mounts and plates 790.00
Full length basket w/ 6 mounts and plates $860.00
Add additional mounts and plates $80.00 per pair

40, 55, 60, 70 and 80 adjustable gutter mounts 30.00 each
61 HighTop Gutter mount $40.00 each
100 series mounts $30.00 each

Mount plates (corner or straight) $10.00 each
3/8" stainless steel hardware mount kits $25.00 (6 mount) $28.00 (8 mounts)
Lights tabs $6.00 a pair
Sunroof cut-out $40.00
1/2" flattened mesh floor Full Floor- $150.00
1/2" flattened mesh floor 1/2 Floor $75.00


BLACK - SEMI GLOSS POWDERCOAT -- $180.00



60 Expo with additional mounts

b-60-expo_orig.jpeg


Custom 61 High Top

IMGP4707-XL.jpg


80 LO-PRO with sunroof cutout (OE rails removed)


View attachment 1223611
80 Full Custom Basket (std height- OE rails not removed)

View attachment 1223612
100 Flat with sunroof cutout


View attachment 1393283

40 Custom (rack follows roof perimeter- not rectangle)


View attachment 1223618

80 Basket -3/4 length (std height)

View attachment 1223619
man those are some nice racks. hopefully i will be able to afford one if i ever get my 60 on the road.
 

Users who are viewing this thread

Back
Top Bottom