4 speed to vacuum case (1 Viewer)

[red66toy]

Does anyone know if a 4 speed from a FJ60 would bolt up to a split transfer case from a FJ62? Thanks.
Ok, it looks like it can be done, but what idler shaft does it take. Does the tranny have to be the 34mm shaft or the 38mm shaft? Thanks

 

[schaats]

If your tranny was taken out from FJ60 which has production date post 85/04, you can use. (VIN range : FJ60-0127360 +)
Those FJ60 have adapter between tranny and t-case.
Regarding idler shaft, it holds idler gear that has no direct relation with tranny output shaft.
Outside of USA, many FJ62s have 4-speed manual tranny with vacuum 4H/2H transfer.
If you use 4-speed tranny with t-case from automatic tranny FJ62, you must remove neutral position switch which is located very near from 4wd low switch on t-case.
Get FSM and refer it then you can get so much help.

Oh, Min Seok

 

[red66toy]

Cool, thanks a lot for the info.