3speed floor shift

[TLCMAN48]

I had to remove the floor shift two years ago for a complete rebuild on a 72 3 speed I'm now ready to put it all back together put the shifter back in and now can't really feel it shifting properly what am I doing wrong .is there a trick. This is a new one on me
Thanks

 

[franklin40]

post some pictures of the linkage and what you’ve done. we don’t have enough info to go on here to really be of help

 

[TLCMAN48]

post some pictures of the linkage and what you’ve done. we don’t have enough info to go on here to really be of help

Front shaft free. 2 wheel high for tc. Can't find neutral. When clutch is in the world is good

I had to remove tc shifter some time ago it was frozen. That seems ok. It did shift prior to me removing stick but will not find neutral
Help. I can shoot inside of top gear box if that is good
Thanks

 

[Living in the Past]

Three speed will have two levers with a notch. If the two notches are not lined with each other in the middle use a large screwdriver to line them up.