3FE Vacuum Schematic Needed - '88 62 (1 Viewer)

[PabloCruise]

I am trying to sort out issues with a 3FE from an '88 62.

I need to confirm my vacuum lines are as they should be.

My '88 FSM does not show all vacuum connections, esp related to the fuel pressure regulator.

Does anyone have a complete vacuum schematic for the 3FE?

 

[alaska60]

C'mon boyz........... someone has this......

 

[Problygot1]

somebody has a camera.....

 

[slcfj62]

https://forum.ih8mud.com/60-series-wagons/213530-how-many-feet-vacuum-hose.html

See post #5.

 

[PabloCruise]

https://forum.ih8mud.com/60-series-wagons/213530-how-many-feet-vacuum-hose.html

See post #5.

Wow, awesome!

Here are some I have collected in order of good, better, best:

 

[PabloCruise]

Can anyone tell me what that 17010A filter connects to?

 

[2mbb]

Can anyone tell me what that 17010A filter connects to?

In the FJ60 that filter connects to the distributor cap. It is installed from the inside of the firewall under the glove box.

 

[PabloCruise]

In the FJ60 that filter connects to the distributor cap. It is installed from the inside of the firewall under the glove box.

Interesting! I wonder why they do not show the other dizzy vent lines...

Thanks

 

[Randy88FJ62]

There should be a metal plate with the diagram on your driver's side firewall up near the top if I'm thinking correctly.

 

[PabloCruise]

Somewhere there is a lonely little FJ62 with a metal plate on its firewall - minus the 3FE that is in my FJ55!!!

Thus my quest for info...

Thanks,

 

[Randy88FJ62]

Somewhere there is a lonely little FJ62 with a metal plate on its firewall - minus the 3FE that is in my FJ55!!!

Thus my quest for info...

Thanks,

Sorry to hear that your 55 doesn's have the metal plate. pm me your phone number and I'll take a cell phone picture of it in 1 hour and send it to you.

 

[PabloCruise]

Thanks!

PM sent

 

[PabloCruise]

So I found this - but it does not include the schematic for the fuel pressure regulator...

 

[Randy88FJ62]

Pictures emailed to you.

 

[PabloCruise]

So I marked the diagram up a little to check the individual circuits for continuity, and also to make the changes to my circuits for Evaporative Charcoal Canister.

I also tracked the circuit for Fuel Pressure Regulator. It connects to the gas valve on the intake.

My hope is that this will help future searchers...

How the F does the gas Valve work, and how do you test it?