3FE Thermostat Housing Sensor Threads (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Thanks, I just need the cap ,fitting that the wire goes into. Not the sensor itself. I’ve e bought them before but can’t remember the plastic cap part number.


cap for what exact sensor Mike ?


a photo would be helpful here .. :)
 
Here's a picture of part

Cruiser part.jpeg
 
That is the fuel system temp sensor. :)
 
Just need the plug not the sensor,looking for a part number. Thanks

These are the latest rage Michael….💥

I would be happy to mail you out one of these genuine ND OEM service spec. Switch Fitting Cap repair kits

PM me your shipping details and I’ll have this in the morning mail :)


thanks


A2F56A98-011F-4279-B42A-A13C37961052.jpeg
4607AB14-F021-4969-8B39-A4D909DE860F.jpeg
 
Just need the plug not the sensor,looking for a part number. Thanks
ooooh! I thought you meant a plug to seal up the port for a missing sensor. The connector part number that works for that is: 90980-10197. If you have the terminal and rubber seal for it you can reuse them. If not, looks like Matt has a complete unit ready to go.
 
ooooh! I thought you meant a plug to seal up the port for a missing sensor. The connector part number that works for that is: 90980-10197. If you have the terminal and rubber seal for it you can reuse them. If not, looks like Matt has a complete unit ready to go.
Just need the plug not the sensor,looking for a part number. Thanks


plus ,

there is
no cost involved since Mike wins the Prize for living the closest to TOYOTA's North American Destination Market Headquarters ... :D
 

Users who are viewing this thread

Back
Top Bottom