3fe starter rebuild (1 Viewer)

[lt1fire]

I know there are starter rebuild kits out there for the 1fz but I haven't seen anyone post up about one for a 3fe. I'm guessing you would need to just assemble the kit yourself?

 

[RockDoc]

From the 60 series section in case you haven't seen:

Here are the Toyota part #s for a starter rebuild.

I just got done rebuilding the starter on my '87 and I thought I would share the part numbers for the contacts and the plunger. I got the parts from Cdan, and he had to cross reference the numbers for a 3FE starter in an early 80 series. The Toyota computer does not show the individual parts...

forum.ih8mud.com

 

[jonheld]

I know there are starter rebuild kits out there for the 1fz but I haven't seen anyone post up about one for a 3fe. I'm guessing you would need to just assemble the kit yourself?

Toyota does not sell "kits" for the starter rebuilds regardless of starter type. The kits are assembled by resellers like Wits End and Cruiser Outfitters.

Starter Rebuild Kit- 2F/3F-E Land Cruisers, 1.0kW

Starter Rebuild Kit- 2F/3F-E Land Cruisers, 1.0Kw (SRK-1KIT)

absolute-wits-end.com

For the 3FE starter:
28235-35080 plunger
28226-72010 starter terminal
28226-72080 battery terminal

 

[lt1fire]

Toyota does not sell "kits" for the starter rebuilds regardless of starter type. The kits are assembled by resellers like Wits End and Cruiser Outfitters.

Starter Rebuild Kit- 2F/3F-E Land Cruisers, 1.0kW

Starter Rebuild Kit- 2F/3F-E Land Cruisers, 1.0Kw (SRK-1KIT)

absolute-wits-end.com

For the 3FE starter:
28235-35080 plunger
28226-72010 starter terminal
28226-72080 battery terminal

Those are the ones I was looking for. Thank you

 

[lt1fire]

@NLXTACY I must have searched your site wrong and only saw the 1fz kit.

As soon as I confirm it is the original starter on the truck (thursday when I get to it again) and confirm it is in fact the starter going out i'll be ordering one of your kits. Hell if it wasn't for these fires i'd drive down and pick one up to save you the shipping trouble.

Wow the 3fe starters are only 1.0 kw.... no kidding.

 

[jonheld]

Wow the 3fe starters are only 1.0 kw.... no kidding.

It's 1000 watts of bone crushing power.

 

[lt1fire]

It's 1000 watts of bone crushing power.

LOL yeah i remember when I helped with a 1fz rebuild a while back it was 3.2 KW or something like that.

 

[jonheld]

LOL yeah i remember when I helped with a 1fz rebuild a while back it was 3.2 KW or something like that.

Largest starter is 2.2KW IIRC.

 

[lt1fire]

Largest starter is 2.2KW IIRC.

Yep you are correct... Just looked it up.

 

[510FJ80]

FWIW i used the same kit on a reman denso starter and have had 0 issues thus far