In need of the airflow meter wire harness plug part number preferably with pigtails. Hoping it’s still available new. (1989 FJ62)
3FE part # (1 Viewer)
- Thread starter fl4031003
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Joined
- Jul 22, 2012
- Threads
- 484
- Messages
- 14,261
- Location
- Winter Park, Florida
- Website
- www.cruisermatts.com
It's a Bosch 7-pin. Commonly available.
- Thread starter
- #3
Still need the part number for this connector.
- Joined
- Jul 22, 2012
- Threads
- 484
- Messages
- 14,261
- Location
- Winter Park, Florida
- Website
- www.cruisermatts.com
Looks like you need a bit more then that. This is the part number for the connector housing, but if you Google "Bosch 7 pin MAF Connector" (Like I mentioned in my first reply you will see dozens of sources such as Ballenger to buy along with terminals and wire seals.
Last edited:
diesellibrarian
SILVER Star
I have to say that's the first time I've seen a wine cork deployed in that particular manner.
- Thread starter
- #6
That cork has been there for 9 year with no issues, oh and the foil was just a test no issues under the foil
Last edited:
EscapeWagon62
SILVER Star
I picked up a pig tail at cruiserparts.net
worth a shot is you are interested in pre-owned
worth a shot is you are interested in pre-owned
i now offer a 100% JAPAN Spec. Parts repair and restore KIT , i hand assemble all these are the TPS ones IN-HOUSE at the SKUNK WORKS Labrotory
FJ62 / FJ80 3FE MAF AIR FLOW METER Repair Connector Plug Harness Side Kit Comes With 3M Marine Grade Heat Shrink Butt Connectors Also - VintageTEqParts.com
- MAF - FJ62 / FJ80 - 3FE - ALL WEATHER SNOW - VERSION RUBBER BOOT Incorporated into this design -...
vintageteqparts.com
