Mine is a 3FE. No cat, de-smogged, exhaust inside the frame (I made the down pipes), I have a trans cross member, no bellhousing mounts. I am running the stock 3fe alternator, PS pump and AC compressor. I also have the york on board air. The 2f mounts fit the 3f block but the frame side mounts need to be slotted. I used the 3fe passenger side mount for the AC compressor. I also added some shims to the front mounts to get the fan in the correct place for the fan shroud. The alternator wiring is part of the fj62 cowl harness which I did not use. I just wired it into the 40 harness. The AC clutch power also feeds into the ECU to up the idle. I use this feature with my "idle up" switch so I can increase idle for winching and airing up. |